Ing. Química
Páginas: 146 (36362 palabras)
Publicado: 11 de diciembre de 2012
HEAT AND MASS TRANSFER – MODELING AND SIMULATION
Edited by Md Monwar Hossain
Heat and Mass Transfer – Modeling and Simulation Edited by Md Monwar Hossain
Published by InTech Janeza Trdine 9, 51000 Rijeka, Croatia Copyright © 2011 InTech All chapters are Open Access articles distributed under the Creative Commons Non Commercial Share Alike Attribution 3.0 license, which permits to copy,distribute, transmit, and adapt the work in any medium, so long as the original work is properly cited. After this work has been published by InTech, authors have the right to republish it, in whole or part, in any publication of which they are the author, and to make other personal use of the work. Any republication, referencing or personal use of the work must explicitly identify the originalsource. Statements and opinions expressed in the chapters are these of the individual contributors and not necessarily those of the editors or publisher. No responsibility is accepted for the accuracy of information contained in the published articles. The publisher assumes no responsibility for any damage or injury to persons or property arising out of the use of any materials, instructions, methodsor ideas contained in the book. Publishing Process Manager Alenka Urbancic Technical Editor Teodora Smiljanic Cover Designer Jan Hyrat Image Copyright Nejron Photo, 2010. Used under license from Shutterstock.com First published September, 2011 Printed in Croatia A free online edition of this book is available at www.intechopen.com Additional hard copies can be obtained from orders@intechweb.orgHeat and Mass Transfer – Modeling and Simulation, Edited by Md Monwar Hossain p. cm. ISBN 978-953-307-604-1
free online editions of InTech Books and Journals can be found at www.intechopen.com
Contents
Preface IX Chapter 1 Modeling of Batch and Continuous Adsorption Systems by Kinetic Mechanisms 1 Alice F. Souza, Leôncio Diógenes T. Câmara and Antônio J. Silva Neto The Gas DiffusionLayer in High Temperature Polymer Electrolyte Membrane Fuel Cells 17 Justo Lobato, Pablo Cañizares, Manuel A. Rodrigo and José J. Linares Numerical Analysis of Heat and Mass Transfer in a Fin-and-Tube Air Heat Exchanger under Full and Partial Dehumidification Conditions Riad Benelmir and Junhua Yang Process Intensification of Steam Reforming for Hydrogen Production Feng Wang, Guoqiang Wang and JingZhou
Chapter 2
Chapter 3
41
Chapter 4
67
Chapter 5
Heat and Mass Transfer in External Boundary Layer Flows Using Nanofluids Catalin Popa, Guillaume Polidori, Ahlem Arfaoui and Stéphane Fohanno Optimal Design of Cooling Towers 117 Eusiel Rubio-Castro, Medardo Serna-González, José M. Ponce-Ortega and Arturo Jiménez-Gutiérrez Some Problems Related to Mathematical Modelling of MassTransfer Exemplified of Convection Drying of Biological Materials Krzysztof Górnicki and Agnieszka Kaleta
95
Chapter 6
Chapter 7
143
VI
Contents
Chapter 8
Modeling and Simulation of Chemical System Vaporization at High Temperature: Application to the Vitrification of Fly Ashes and Radioactive Wastes by Thermal Plasma Imed Ghiloufi Nonequilibrium Fluctuations in Micro-MHDEffects on Electrodeposition 189 Ryoichi Aogaki and Ryoichi Morimoto
167
Chapter 9
Preface
This book covers a number of topics in heat and mass transfer processes for a variety of industrial applications. The research papers provide information and guidelines in terms of theory, mathematical modeling and experimental findings in many research areas relevant to the design of industrialprocesses and equipment. The equipment includes air heaters, cooling towers, chemical system vaporization, high temperature polymerization and hydrogen production by steam reforming. Nine chapters of the book will serve as an important reference for scientists and academics working in research areas mentioned above, at least in the aspects of heat and/or mass transfer, analytical/numerical...
Edited by Md Monwar Hossain
Heat and Mass Transfer – Modeling and Simulation Edited by Md Monwar Hossain
Published by InTech Janeza Trdine 9, 51000 Rijeka, Croatia Copyright © 2011 InTech All chapters are Open Access articles distributed under the Creative Commons Non Commercial Share Alike Attribution 3.0 license, which permits to copy,distribute, transmit, and adapt the work in any medium, so long as the original work is properly cited. After this work has been published by InTech, authors have the right to republish it, in whole or part, in any publication of which they are the author, and to make other personal use of the work. Any republication, referencing or personal use of the work must explicitly identify the originalsource. Statements and opinions expressed in the chapters are these of the individual contributors and not necessarily those of the editors or publisher. No responsibility is accepted for the accuracy of information contained in the published articles. The publisher assumes no responsibility for any damage or injury to persons or property arising out of the use of any materials, instructions, methodsor ideas contained in the book. Publishing Process Manager Alenka Urbancic Technical Editor Teodora Smiljanic Cover Designer Jan Hyrat Image Copyright Nejron Photo, 2010. Used under license from Shutterstock.com First published September, 2011 Printed in Croatia A free online edition of this book is available at www.intechopen.com Additional hard copies can be obtained from orders@intechweb.orgHeat and Mass Transfer – Modeling and Simulation, Edited by Md Monwar Hossain p. cm. ISBN 978-953-307-604-1
free online editions of InTech Books and Journals can be found at www.intechopen.com
Contents
Preface IX Chapter 1 Modeling of Batch and Continuous Adsorption Systems by Kinetic Mechanisms 1 Alice F. Souza, Leôncio Diógenes T. Câmara and Antônio J. Silva Neto The Gas DiffusionLayer in High Temperature Polymer Electrolyte Membrane Fuel Cells 17 Justo Lobato, Pablo Cañizares, Manuel A. Rodrigo and José J. Linares Numerical Analysis of Heat and Mass Transfer in a Fin-and-Tube Air Heat Exchanger under Full and Partial Dehumidification Conditions Riad Benelmir and Junhua Yang Process Intensification of Steam Reforming for Hydrogen Production Feng Wang, Guoqiang Wang and JingZhou
Chapter 2
Chapter 3
41
Chapter 4
67
Chapter 5
Heat and Mass Transfer in External Boundary Layer Flows Using Nanofluids Catalin Popa, Guillaume Polidori, Ahlem Arfaoui and Stéphane Fohanno Optimal Design of Cooling Towers 117 Eusiel Rubio-Castro, Medardo Serna-González, José M. Ponce-Ortega and Arturo Jiménez-Gutiérrez Some Problems Related to Mathematical Modelling of MassTransfer Exemplified of Convection Drying of Biological Materials Krzysztof Górnicki and Agnieszka Kaleta
95
Chapter 6
Chapter 7
143
VI
Contents
Chapter 8
Modeling and Simulation of Chemical System Vaporization at High Temperature: Application to the Vitrification of Fly Ashes and Radioactive Wastes by Thermal Plasma Imed Ghiloufi Nonequilibrium Fluctuations in Micro-MHDEffects on Electrodeposition 189 Ryoichi Aogaki and Ryoichi Morimoto
167
Chapter 9
Preface
This book covers a number of topics in heat and mass transfer processes for a variety of industrial applications. The research papers provide information and guidelines in terms of theory, mathematical modeling and experimental findings in many research areas relevant to the design of industrialprocesses and equipment. The equipment includes air heaters, cooling towers, chemical system vaporization, high temperature polymerization and hydrogen production by steam reforming. Nine chapters of the book will serve as an important reference for scientists and academics working in research areas mentioned above, at least in the aspects of heat and/or mass transfer, analytical/numerical...
Leer documento completo
Regístrate para leer el documento completo.