Ingenieria

Programming Manual

Logix5000 Controllers Produced and Consumed Tags
Catalog Numbers 1756-L1, 1756-L55, 1756-L61, 1756-L62, 1756-L63, 1769-L31, 1769-L32C, 1769-L32E, 1769-L35CR, 1769-L35E, 1789-L60, 1794-L34, PowerFlex 700S/SE

Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for theApplication, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid stateequipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrativepurposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents ofthis manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited. Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economicloss. ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present. BURN HAZARD: Labels maybe on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous temperatures. IMPORTANT Identifies information that is critical for successful application and understanding of the product.

Allen-Bradley, Rockwell Automation, Logix5000, RSLogix 5000, ControlLogix, CompactLogix, GuardLogix, PowerFlex, DriveLogix, FlexLogix, SoftLogix, andTechConnect are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.

2

Rockwell Automation Publication 1756-PM011D-EN-P - November 2011

Summary of Changes

Introduction New Information

The release of this document contains new information.

New information is marked by change bars in the side column, as shown tothe right
Section Chapter 1 Change Minor addition made to the Create a Consumer Tag procedure .

Rockwell Automation Publication 1756-PM011D-EN-P - November 2011

3

Summary of Changes

Notes:

4

Rockwell Automation Publication 1756-PM011D-EN-P - November 2011

Table of Contents
Summary of Changes Table of Contents Preface
Introduction. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 New Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Purpose of This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 1 Produce and Consume a Tag
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . ....