Ingeniero

PARTS LIST
For
Pneumatic Drill
Model: VL120

CPN 51730505

E 1991 INGERSOLL-RAND COMPANY PRINTED IN U.S.A.

PL6026

PARTS LIST

INTRODUCTION
For

July 22, 1991

Pneumatic Drill VL120

PL6026
Section Intro---1
Page 1 of 2

ORDERING INSTRUCTIONS
When ordering spare or replacement parts, please specify:
1. The NAME of each part as listed.
2. The PART NUMBER as listed orstamped on the part.
3. The SERIAL NUMBER of the equipment.
DO NOT use illustration numbers when ordering spare or replacement parts. To save time, send all orders for parts
to the nearest branch office or agent. IF IT IS NECESSARY TO SEND ANY PART OF THIS EQUIPMENT TO THE
FACTORY, INQUIRE AT OUR NEAREST BRANCH OFFICE OR AGENT FOR SPECIAL INSTRUCTIONS. PRODUCT
IMPROVEMENT IS A CONTINUING GOALAT INGERSOLL---RAND. DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION.

RECOMMENDED SPARES
The spare part recommendations are shown in three columns under heading “Recommended Spares”. Recommendations are given for three (3) classes of installation, based on spare parts availability and cover one shift
operation for one year.
CLASS 1 (Min.) -- Covers recommendedquantities of spares for a single unit where additional spare parts are
ordinarily available from Branch or Dealer stock.

1991 Ingersoll--- Rand Company
Printed in U.S.A.

CLASS 2 (Av.) -- Covers recommended quantities of spare parts for a single unit where additional spare parts
would not be readily available.
CLASS 3 (Max.) -- Covers recommended quantities of spare parts for a single unitwhere maximum protection from
major shutdown must be afforded such as an export installation.
The Spare Part Recommendations are applicable to machines now being assembled. When spares are ordered for specific machines by serial numbers, it may be necessary to make a few substitutions to ensure supplying
parts that will fit the specific machines for which they are intended.
Since we are notfamiliar with local operation and maintenance conditions, we cannot guarantee that these recommendations include every part which may be required in any given period of time, nor can we warrant that all of
these parts will be needed. Generally, however, we are confident that these recommendations will provide reasonably good protection.

NAME OF ASSEMBLY
Components of an assembly
areindented.

Each column includes the Parts List
Section Numbers applicable to the assembly.

Manua
l
No.
PNEUMATIC DRILL VL120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL6026

Section
No.
1

Page 2, Section Intro---1, PL6026

PARTS LIST

PNEUMATIC DRILL

PL6026

VL120

Section 1

July 22, 1991

Page 1 of 5

PNEUMATIC DRILLVL120
(For Parts List, refer to Pages 3 & 4)

PNEUMATIC DRILL VL120
(For Parts List, refer to Pages 3 & 4)

Page 2, Section 1, PL6026

PNEUMATIC DRILL VL120
(For Illustration of parts, refer to Pages 1 & 2)

REF
NO.

PART
NO.
50595511

NAME OF PART
Parts indented under an item
are included with that item

Q
T
Y

RECOMMENDED
SPARES
CLASS
1
2
3
Min. Av. Max.PNEUMATIC DRILL VL120
(CONSISTS OF THE FOLLOWING)

L
L
L
L
L
L
L

1
2
3
4
5
6
7
8
9
10

L

11
12
13

L

L
L

+
L
L

+

+
+
+

L
L
L
L
L
L

15
16
17
18
19
20
22
23
24
25
26
27
28
29
30
32
33
34
35
36
37
D 38
D 40
D 41
D 42
D 43
D
D 44
D 45
D 46
D 47
D 48
D 49
D 50

50364413
95018172
50057215
50498302
5064696750942325
50202985
50202936
50019322
50019330
50976935
50976943
50080555
95086526
50914761
50914779
50942143
95018461
50494475
95018719
50023886
50510510
50509249
51004745
95018404
50965995
50914787
50914795
50942143
50494822
50473818
50532753
50645431
++
95034062
50532852
50643642
50643634
50985829
95214953
95096962
50210491
50985779
50365253
++
50251594...