Ingeniero

Shocks GAM E JOYSTICK OPERATION INSTRUCTION
(USB shocks game joystick systems)
Shocks single/double joystick systems:
First:The system of products operation ways are inWIN2000/XP/VISTA:
You need to put the joysticks’ line plugs to cut in USB plugs,then system will recognize
and fit the plugs’driver.
2. installing the products’together with disk driver complete fullytheproducts’fitting
steps.Please text the joysticks .Measureing joysticks are the same as using them in WIN98.
Second: The system of products’fitting ways are in WIN98:
A: You should connect the gamecontroller with the USB interface then system will lead to find out the “new disk and present adding new disks instructor”,for
Example picture one,button the next step,appearing the view,for examplepicture two.
[pic](1) (2)

B: In picture two,button “search for the best driver for you decive”,button the “next”,appearing the view,for instance,picturethree.
[pic](3) (2)
C:Knock the next step,presenting the view,for instance picture four,button “next” measure.The the system will renovate the driver,presenting thepicture five.Button the next step to finish.

[pic] (5)
D:USB port driver install finish.
Third:Install the driver of joystick.
1, Inter the dish of driver ,open the web for joystick item NO,pushsetup.exe install the products driver.for exaple Shocks joypad-Single joystick installing.
A:open the web of Shocks joypad-Single.
[pic]
B:set setup.exe.
C:Install for the word,and finish.[pic]1) [pic]2)
[pic]3)
D:joystick’s driver install finished.
Fourth:Text the joysticks.
A:open the cotroll panel(star-setting-controll panel),for picture one.inter the control panel..
[pic]1)[pic]2)B:open the game control into the text picture three.And push properties in picture four.
[pic]3)[pic]4)
C:push the mode on the joystick,enter the calibration….properties,for exaple piture...