Ingeniero

EIGRP

Configuración router 1
Router>
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int
Router(config)#interface s0/0/0
Router(config-if)#ip ad
Router(config-if)#ip address 10.1.1.2 255.255.255.0
Router(config-if)#ip address 10.1.1.2 255.255.255.252
Router(config-if)#no suh
Router(config-if)#no shu
Router(config-if)#noshutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config-if)#exit
Router(config)#in
Router(config)#interface fa0/0
Router(config-if)#ip ad
Router(config-if)#ip address 192.168.10.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: InterfaceFastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#in
Router(config)#interface fa0/1
Router(config-if)#ip ad
Router(config-if)#ip address
% Incomplete command.
Router(config-if)#ip address 192.168.11.1 255.255.255
^
% Invalid input detectedat '^' marker.

Router(config-if)#ip address 192.168.11.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#

Configuración router Router 2

Router>ENA
Router#CONF TE
Enter configuration commands, one per line. Endwith CNTL/Z.
Router(config)#INE
Router(config)#INT
Router(config)#INT
Router(config)#INTerface S0/0/0
Router(config-if)#IP AD
Router(config-if)#IP ADdress 10.1.1.0 255.255.255.252
Bad mask /30 for address 10.1.1.0
Router(config-if)#IP ADdress 10.1.1.1 255.255.255.252
Router(config-if)#NO SHUT

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
Router(config-if)#CLORouter(config-if)#CLOck R
Router(config-if)#CLOck Rate 64000
Router(config-if)#NO SHUT
Router(config-if)#INT
Router(config-if)#EXIT
Router(config)#INT
Router(config)#INTerface S0/0/1
Router(config-if)#IP AD
Router(config-if)#IP ADdress 10.2.2.0 255.255.255.248
Bad mask /29 for address 10.2.2.0
Router(config-if)#IP ADdress 10.2.2.1 255.255.255.248
Router(config-if)#NO SHUT
Router(config-if)#NOSHUTdown

%LINK-5-CHANGED: Interface Serial0/0/1, changed state to down
Router(config-if)#EXIT
Router(config)#IN
Router(config)#INterface FA0/00
Router(config-if)#INterface FA0/0
Router(config-if)#IP A
Router(config-if)#IP AD
Router(config-if)#EXIT
Router(config)#INT
Router(config)#INTerface S0/1/1
Router(config-if)#IN
Router(config-if)#IP A
Router(config-if)#IP ADRouter(config-if)#IP ADdress 209.165.200.225 255.255.255.224
Router(config-if)#NO SHUT
Router(config-if)#NO SHUTdown

%LINK-5-CHANGED: Interface Serial0/1/1, changed state to down
Router(config-if)#EXIT
Router(config)#IN
Router(config)#INterface FA0/0
Router(config-if)#IP AD
Router(config-if)#IP ADdress 192.168.20.254 255.255.255.0
Router(config-if)#no shut
Router(config-if)#no shutdownConfiguración router Router 3

Router>
Router>ena
Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#in
Router(config)#interface s0/0/0
Router(config-if)#ip ad
Router(config-if)#ip address 10.2.2.2 255.255.255.248
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

Router(config-if)#exit
Router(config)#inRouter(config)#interface fa0/0
Router(config-if)#ip
Router(config-if)#ip a
Router(config-if)#ip ad
Router(config-if)#ip address 192.168.30.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#...