Ingeniero

Subnetting and VLSM Review
Write the subnet, broadcast address, and valid host range for question 1 through
question 6:
1. 192.168.100.25/30
2. 192.168.100.37/28
3. 192.168.100.66/27
4.192.168.100.17/29
5. 192.168.100.99/26
6. 192.168.100.99/25
7. What is the broadcast address of 192.168.192.10/29?
8. How many hosts are available with a Class C /29 mask?
9. What is the subnet for hostID 10.16.3.65/23?
10. W hat is the maximum number of IP addresses that can be assigned to hosts
on a local subnet that uses the 255.255.255.224 subnet mask?
A. 14
B. 15
C. 16
D. 30
E. 3 1
F.62
11. You have a network that needs 29 subnets while maximizing the number of
host addresses available on each subnet. How many bits must you borrow from
the host field to provide the correctsubnet mask?
A. 2
B. 3
C. 4
D. 5
E. 6
F. 7
12. W hat is the subnetwork address for a host with the IP address 200.10.5.68/28?
A. 200.10.5.56
B. 200.10.5.32
C. 200.10.5.64
D. 200.10.5.0

13.The network address of 172.16.0.0/19 provides how many subnets and hosts?
A. 7 subnets, 30 hosts each
B. 7 subnets, 2,046 hosts each
C. 7 subnets, 8,190 hosts each
D. 8 subnets, 30 hosts each
E.8 subnets, 2,046 hosts each
F. 8 subnets, 8,190 hosts each

14. A network administrator is connecting hosts A and B directly through their
Ethernet interfaces, as shown in the illustration. Pingattempts between the hosts
are unsuccessful. What can be done to provide connectivity between th e hosts?
(Choose two.)

A. A crossover cable should be used in place of the straight-through cable.B. A rollover cable should be used in place of the straight-through cable.
C. The subnet masks should be set to 255.255.255.192.
D. A default gateway needs to be set on each host.
E. The subnetmasks should be set to 255.255.255.0.

15. Using the following illustration, what would be the IP address of E0 if you were
using the eighth subnet? The network ID is 192.168.10.0/28 and you need...