Ingeniero

8

7

6

5

4

3

2
REVISIONS REV. DESCRIPTION

1
DATE APPROVED

MANUFACTURER SHERWOOD VALVE LLC MUELLER INDUSTRIES

MANUFACTURER PART # 802BX140-6S AK 17954

CSA/UL DESIGNATION802BX A-17954

CAP TORQUE FT. LBS. 45 14-16

UL FILE SA1392

CSA GUIDE FILE CLASS SFJQ2/8 LR32768 1223-01 SFJQ -

1

2

5-14-07 CHANGED MANUFACTURER IN NOTE A. MEYER ONE AND ADDED LINES2,3 AND 4 TO 5-14-07 NOTE 2; REMOVED OLD TABLE IN D3 K. MACK AND MADE NEW TABLE. UPDATED MAX WORKING PRESSURE 02-16-09 K. FREEWALT FROM 500 PSIG TO 700 PSIG 02-16-09 B. ADOLPH REMOVED MFGR. REFERENCESIN NOTES; ADDED MFGRS. & CAP TORQUE IN TABLE; MUELLER IS NEW TO THIS DRAWING; UPDATED NOTE 1. MFGR. SHERWOOD VALVE LLC WAS SHERWOOD HARSCO AND CAP TORQUE VALUE 45 WAS 35 IN TABLE. REVISED NOTE 8 TOINCLUDE INFO TO LUBRICATE SEAL RING WITH REFRIGERANT OIL. 03/01/10 W. COHAGAN 03/01/10 F. DIPAOLO

D

3

D

4 CAP

01/17/12 B. WHITNEY 01/17/12 K. STEPHENS

SEAL RING

SPRING POPPET

CTEFLON SEAT

C

41 1.6

NOTES: 1. MANUFACTURER PART NUMBER T0 BE LISTED ON PART OR SHIPPING CONTAINER. 2. SPRING DIFFERENTIAL: 140 LBS 3. MAX WORKING PRESSURE: 700 PSIG 4. TEMP RANGE: -40°F TO400°F 5. VALVE BODY MATERIAL: BRASS 6. VALVE SHIPPED LOOSELY ASSEMBLED 7. REMOVE CAP, SEAL RING, SPRING, AND POPPET TO BRAZE TUBES 8. AFTER BRAZING, REASSEMBLE AS SHOWN, LUBRICATE SEAL RING WITHREFRIGERANT OIL AND TORQUE CAP TO SPECFIED VALUE.

B

B

FOR .375 O.D. TUBING .44 DEEP

FOR .375 O.D. TUBING .44 DEEP 76 3.0
CONTROL CHARACTERISTICS SYMBOL LEGEND MATERIAL: FINISH:

M H NA NONEDESIGN MAJOR HIGHLIGHTED

167770P1
PART NUMBER

VALVE CHECK 3/8" OD SPRING
DESCRIPTION

© EMERSON NETWORK POWER - CONFIDENTIAL AND PROPRIETARY - ALL RIGHTS RESERVED

A

MATERIAL NOTE:FABRICATE FROM THE MATERIAL SPECIFIED IN ACCORDANCE WITH THE CURRENT APPLICABLE LIEBERT ENGINEERING SPECIFICATION OR AS OTHERWISE SPECIFIED ON THIS DRAWING. THIRD ANGLE PROJECTION DIMENSIONAL...