Ingeniero

®

®

Section

26-

POWER SYSTEMS, INC.

26

Hi*Lite® XL Transmission Insulators

A

OHIO BRASS – AIKEN, SC

JULY 2006 Printed in USA

®

®

26-2
POWER SYSTEMS, INC.

Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material andworkmanship. Buyer must notify the Company promptly of any claim under this warranty. The Buyer's exclusive remedy for breach of this warranty shall be the repair or replacement, F.O.B. factory, at the Company's option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OFLAW, COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE IMPLIED, SHALL EXIST IN CONNECTION WITH THE COMPANY'S PRODUCTS OR ANY SALE OR USE THEREOF. The Company shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer. The Company's warranty shall run only to the first Buyer of a product from the Company, from the Company's distributor, or from anoriginal equipment manufacturer reselling the Company's product, and is

non-assignable and non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer. This warranty applies only to the use of the product as intended by Seller and does not cover any misapplication or misuse of said product. Warranty - Application Hubbell Power Systems, Inc. does notwarrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study. This applies regardless of whether a charge is made for the recommendation, or if it is provided free of charge. Responsibility for selection of the proper product or application rests solely with the purchaser. In the event of errors or inaccuracies determined tobe caused by Hubbell Power Systems, Inc., its liability will be limited to the re-performance of any such analysis or study.

©

NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.

Copyright 2006 Hubbell/Ohio Brass • 1850 Richland Avenue, East • Aiken, SC 29801

JULY 2006

OHIO BRASS – AIKEN, SC®

®

26-
POWER SYSTEMS, INC.

Hi*Lite® XL Transmission Insulators
Suspensions Line Posts A B C D E

Section 26

Braced Posts Station Posts Sample Polymer Specs

OHIO BRASS – AIKEN, SC

JULY 2006

®

®

26-
POWER SYSTEMS, INC.

JULY 2006

OHIO BRASS – AIKEN, SC

®

®

26-
POWER SYSTEMS, INC.

Hi*Lite XL Suspension Insulators
®

A

Table of ContentsPage Design .............................................................. 26-6 Rod ................................................................... 26-6 End Fittings....................................................... 26-6 Weathersheds .................................................. 26-6 Interface............................................................ 26-6 Leakage Distance............................................. 26-6 Washability ....................................................... 26-6 Mechanical Ratings .......................................... 26-6 Lengths Available ............................................. 26-6 Product Updates ............................................... 26-6 Packaging ......................................................... 26-6Corona Performance ........................................ 26-7 Hi*Lite XL 25k SML Data .................................. 26-8 Hi*Lite XL 30k SML Data .................................. 26-9 Hi*Lite XL 50k SML Data ................................ 26-10 End Fitting Detail ............................................ 26-11 Key to the Catalog Numbers .......................... 26-11

OHIO BRASS –...