Inner Installation

Inner installation of the house
: • The different points from lighting system and takings of current will be distributed in 4 independent circuits, being each of them protected by a small automaticswitch (PIA). • One will have the pictures entrance more close possible of the entrance in the house (with the deprived elements of control and protection), and the box to lodge the control switch ofpower (ICP). • In the switchboard an automatic switch would settle (IGA), an interrupting differential (YOU GO) highly sensitive, and four small automatic switches (PIAS). • In the box of the ICP thenecessary conductors will leave themselves preparations so that the providing company of energy installs the same and comes to the sealed one of its box. • The connections between conductors would bealways realised by means of strips of you twist. • The protective tubes to install will be curvables in cold and nonpropagators of the flame. • The conductors will be of electrolytic copper, with alevel of isolation of 750 V, settling for the phase the black, blue color for neutral and the yellow-green one for the protection conductor. All of them with the calculation section that corresponds tothem. • In order to distinguish common threads between commutators of two-way traffic and crossovers, we will make it with the gray color, placing a label to him that he indicates that it is not eastcolor is not of phase. • The clearing will be done following horizontal and vertical ways, respecting the prescribed distances. • The distance to the pavement of the boxes of mechanisms will beincluded between 1' 10 and 1' 20 M.s and to about 20 cm. Of the end of the nearest partition. • The distance to the ceiling of the boxes of derivation and the timbre will be of about 20 cm. and the basicboxes of plug to the pavement also of 20 cm. • The switchboard and the box of the ICP would be placed to a height of the ground between 1' 80 and 2 M.s • In the bathroom the volumes of prohibition and...