Instalacion Docu

DocuShare Installation Guide

Publication date: December 2009 This document supports DocuShare Release 6.5/DocuShare CPX Release 6.5

Prepared by: Xerox Corporation DocuShare Business Unit 3400 Hillview Avenue Palo Alto, California 94304 USA © 2008 Xerox Corporation. All rights reserved. Xerox®, DocuShare®, and Fuji Xerox® are trademarks of Xerox Corporation in the United States and/or othercountries. All other trademarks are the property of their respective companies and are recognized as such.

Important! — Please Read Additional Information Regarding Software Installation and Upgrade
This page provides additional steps that you MUST follow after installing or upgrading DocuShare software. Read this page before installing or upgrading DocuShare software. New DocuShareinstallations—After completing the DocuShare installation and site licensing using the instructions provided in the appropriate chapter of this guide, perform the procedure below. DocuShare upgrades—After completing the DocuShare upgrade using the instructions provided in the appropriate chapter of this guide, except for running dsindex index_all as you will run the command below, make sure the site islicensed and then perform the procedure below. 1. Stop DocuShare. 2. In a command prompt window, run \bin\idoltool -s resetserver all y.

Caution: The idoltool -s resetserver all y command clears the IDOL search indexes. This command only should be run immediately before running dsindex index_all. 3. Optional: To increase the allocation of available memory for IDOL on 64-bit Windows servers, runthe appropriate idolsetup command according to the amount of RAM on the server. • • • • 4–8 GB RAM: \bin\idolsetup.bat idol_default.config 8–16 GB RAM: \bin\idolsetup.bat idol_medium.config 16–32 GB RAM: \bin\idolsetup.bat idol_large.config 32+ GB RAM: \bin\idolsetup.bat idol_unlimited.config

Note: At least 6 GB of RAM is recommended on a 64-bit Windows server. 4. Start DocuShare. 5. Run\bin\dsindex index_all. 6. Review the auto_recover_report.log file written to \bin directory. 7. Run \bin\verifyIndex.bat to verify that the documents in the repository have been indexed. 8. If DocuShare was configured for LDAP, continue with the following steps. If your site does not use LDAP, you are finished with the procedure. 9. Log into DocuShare as admin and go to Admin Home. 10. From theAdministration menu, click Account Management | LDAP Accounts | Bind Group. 11. On the Bind Group page, set the Keywords LDAP Attribute to cn. Click Apply. 12. On the same Bind Group page, remove the Keywords LDAP Attribute entry. Click Apply. Note: These last two steps invoke a schema update to replace incorrect schema information with up-todate attribute values from the LDAP server.

Table ofContents
Chapter 1 Before you begin installation
DocuShare license information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 DocuShare technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Information required for DocuShare installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4

Chapter 2

DocuShare on a Windows platform

Install DocuShare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1Uninstall DocuShare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4 Uninstall SQL Server Express database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4 Upgrade DocuShare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....