Ipc -A-610D

ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES ®

IPC-A-610D SP
Aceptabilidad de Ensambles Electrónicos

IPC-A-610D SP
Febrero 2005 Reemplaza A-610C Enero 2000 Un estándar dessarrollado por el IPC
3000 Lakeside Drive, Suite 309S, Bannockburn, IL 60015-1219 Tel. 847.615.7100 Fax 847.615.7105 www.ipc.org

The Principles of Standardization

In May 1995 the IPC’s Technical ActivitiesExecutive Committee (TAEC) adopted Principles of Standardization as a guiding principle of IPC’s standardization efforts. Standards Should: • Show relationship to Design for Manufacturability (DFM) and Design for the Environment (DFE) • Minimize time to market • Contain simple (simplified) language • Just include spec information • Focus on end product performance • Include a feedback system on use andproblems for future improvement Standards Should Not: • Inhibit innovation • Increase time-to-market • Keep people out • Increase cycle time • Tell you how to make something • Contain anything that cannot be defended with data

Notice

IPC Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers,facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of IPC from manufacturing or selling products not conforming to such Standards and Publication, nor shall the existence of suchStandards and Publications preclude their voluntary use by those other than IPC members, whether the standard is to be used either domestically or internationally. Recommended Standards and Publications are adopted by IPC without regard to whether their adoption may involve patents on articles, materials, or processes. By such action, IPC does not assume any liability to any patent owner, nor dothey assume any obligation whatever to parties adopting the Recommended Standard or Publication. Users are also wholly responsible for protecting themselves against all claims of liabilities for patent infringement.

IPC Position Statement on Specification Revision Change

It is the position of IPC’s Technical Activities Executive Committee that the use and implementation of IPC publications isvoluntary and is part of a relationship entered into by customer and supplier. When an IPC publication is updated and a new revision is published, it is the opinion of the TAEC that the use of the new revision as part of an existing relationship is not automatic unless required by the contract. The TAEC recommends the use of the latest revision. Adopted October 6, 1998 Your purchase of thisdocument contributes to the ongoing development of new and updated industry standards and publications. Standards allow manufacturers, customers, and suppliers to understand one another better. Standards allow manufacturers greater efficiencies when they can set up their processes to meet industry standards, allowing them to offer their customers lower costs. IPC spends hundreds of thousands of dollarsannually to support IPC’s volunteers in the standards and publications development process. There are many rounds of drafts sent out for review and the committees spend hundreds of hours in review and development. IPC’s staff attends and participates in committee activities, typesets and circulates document drafts, and follows all necessary procedures to qualify for ANSI approval. IPC’s membershipdues have been kept low to allow as many companies as possible to participate. Therefore, the standards and publications revenue is necessary to complement dues revenue. The price schedule offers a 50% discount to IPC members. If your company buys IPC standards and publications, why not take advantage of this and the many other benefits of IPC membership as well? For more information on...