Jains

Creating a New PCB Document
Before you transfer the design from the Schematic Editor to the PCB Editor, you need to create the blank PCB with atleast a board outline. The easiest way to create a new PCB design in Altium Designer is to use the PCB Board Wizard, which allows you to choosefrom industry-standard board outlines as well as create your own custom board sizes. At any stage you can use the Back button to check or modifyprevious pages in the wizard.
To create a new PCB using the PCB Wizard, complete the following steps:
1. Create a new PCB by clicking on PCB BoardWizard in the New from Template section at the bottom of the Files panel. If this option is not displayed on the screen, close some of the sectionsabove by clicking on the up arrow icons.
2. The PCB Board Wizard opens with an introduction page. Click Next to continue.
3. Set the measure unitsto Imperial, i.e. 1000mil = 1 inch.
4. The third page of the wizard allows you to select the board outline you wish to use. For this tutorial wewill enter our own board size. Select Custom from the list of board outlines and click Next.
5. In the next page you enter custom board options.For the tutorial circuit, a 2 x 2 inch board will give us plenty of room. Select Rectangular and type 2000 in both the Width and Height fields.Deselect Title Block & Scale, Legend String and Dimension Lines. Click Next to continue.
6. This page allows you to select the number of layers