Kan-Ban Implementation

|TOPHOTO |ACTION |
|Responsibility |All personnel atMichigan Spring of Stamping of El Paso TX |
|Conditions For Use |Each time that a row of pallets is consumed|
|Requirements |Kan-Ban Cards |
|Form & Document ID ||
|Source For F&D |Quality Engineer|
|F&D Disposition | |

SET-UP INSTRUCTION:

1) After receiving thePallets from supplier, make sure to place them at the proper location in the square marked on the floor”. See photo # 1

[pic]

Photo # 12) Make sure the entire area is free from garbage, trash or any other waste associated with the pallet storage.

OPERATION INSTRUCTION:

1) The process begins when the pallets are stacked in thesquare marked in the floor, 15 pallets per square and must be grouped by SIZE.

See photo #2

[pic]

Photo #2

2)Please notice that the horizontal stick is used to pointed out the Maximum pallet stock allowed per square (15 pc Max). See Photo #3

[pic]Photo #3

Once the first square of pallets is consumed a small yellow square will appear inside the big green square (Whatever the Pallet size is) this is the...