La Bicicleta Y Sus Funciones

funciones

Bicycle
Bicycle

Pre-assembly of a bicycle

Steps in pre-assembly of a bicycle:
You should verify that the box which contains the bike has the factory seal tape (guarantee).Remove cuidadosamentepara bike box from damage, making sure the bike is in top shape to be armed.
Details containing a bicycle accessories:
seat
tube
pair of pedals
delatero rear reflective and (whereapplicable)
caramayola holder (when correspanda)
caramayola (where applicable)
caramayola bolts (2)
instruction manual
tee ferrule
munubrio ferrule
horns (where applicable)
4. - Then Itsuggests placing the bike on a pedestal to proceed with pre-assembled:

* 4.1-saucers insurance (security lock).

* 4.2-Remove Empol and cardboard.

* 4.3-Check that the frame and forkpinura are in good condition.

* 4.4-Check that the stickers are in good condition.

* 4.5-Placing the tee on the handlebar and fork (5cm. on the headset).

* 4.6-Install the front wheel,leaving it focused on both brake pads, leaving the lock on the right side of the wheel (where applicable).

* 4.7-Adjusting bolt and nut reflective front (where applicable).

* Place4.8-pedals on bottom of the crank (pedal differs izquerdo right adhesive for the advice, in addition to the pedal axle has a letter identical right pedal (R) of izquerdo (L), these must be securely tightened)* Portacaramayola Place in 4.9-frame with their respective bolts.

* 4.10-in portacaramayola caramayola Place.

* 4.11-place seat tube and the respective seat in the central tube ofthe frame.

* 4.12-adjusting nut bolt and rear reflective.

Fernanada Penna, Antonella Santis and Paula Bridges.

Posted by Paula, NICOLA, Javiera Fernanda ANTONELLA at 10:10
NO COMMENT:Post a Comment

Newer Post Older Post Home
Subscribe to: Post Comments (Atom)
HOW TO KEEP THE BIKE (Posted by ANTONELLA SANTIS)

To maintain a bicycle must be clear that there are things to do...