La Vida Es Bella

Driving Simulator 2011
Installation
Before installing Driving Simulator 2011, please check the system requirements.
You need at least:
- Windows XP/Vista/7
- Pentium IV processor with 2 GHz
- 1 GB RAM
- GeForce 6800 or Radeon X1600 graphic card with 128 MB video memory
- 1.5 GB free hard disk space
- DirectX 9.0c
- nVidia PhysX system software under
- DVD-ROM drive
Note: gamecontroller and steering wheels are supported.
Insert the Driving Simulator 2011 DVD into your DVD drive. The installation starts
automatically. If the installation does not start automatically please proceed as follows...
For Windows XP:
Click , and enter D:\setup.exe. Then click . "D" stands for the letter
of your DVD-ROM drive. If your DVD-ROM drive has another drive letter, you must
substitute"D" with the appropriate letter.
For Windows Vista/7:
Click on the round Windows-Symbol and enter D:\setup.exe into the dialogue box. Then
press the Enter key. "D" stands for the letter of your DVD-ROM drive. If your DVD-ROM
drive has another drive letter, you must substitute "D" with the appropriate letter.
Then follow the instructions from the setup programme. Please note that installationcan
take some time. Do not run the setup programme twice.
If security messages are displayed under Windows Vista or Windows 7 during execution of
setup.exe, you may confirm execution without hesitation.
Finally, the newest version of DirectX (Microsoft) and PhysX Software (Nvidia) are installed
by default. If you already have installed the latest versions, you can cancel their
installation.Starting the game
You can start Driving Simulator 2011 either via the start menu (START -> ALL
PROGRAMS -> Driving Simulator 2011 -> Driving Simulator 2011) or by clicking the icon
on your desktop which you can create during installation.
Important: if there are problems under Windows Vista or Windows 7 (programme won't
start, error message or fault after starting a drivingsession/missions), always run Driving
Simulator 2011 in administrator mode. To do this click on the Icon for Driving Simulator
2011 with the right mouse button instead of the left. In the menu that appears click RUN
AS ADMINISTRATOR.

Page 1 - Driving Simulator 2011

Game control and settings
When running the game for the first time, you must create a new game profile. Enter the
desired name for theprofile and confirm. You will switch to the main menu with the
following selections:
- Free play
- Missions
- Settings
- Exit
Free play
Clicking Free play will allow you to drive around the level freely without being restricted by
traffic regulations. Select the desired town area, the starting point as well as the traffic
density. If you have already unlocked new vehicles, you will be ableto select them here as
well. If you wish to exit free play, press the Escape key to return to the main menu. The
driving characteristics are based on the laws of physics and were implemented with the
help of the PhysX system software from Nvidia. The vehicles are implemented with their
corresponding characteristics. This means, for example, that the bus is much heavier than
the racing carwhich will become quite clear during any collision.
Missions:
Various scenarios with a large number of missions are available in the mission menu. You
can change between different scenarios by clicking the small button (tyre track) with the
right arrow directly adjacent to the name of the scenario. Once you have made your
decision, click on the lower button named Start scenario.
Tip: if you areheld up because of an accident or driving error, you can press the R key to
put yourself back onto the road.
There are a large number of missions within the scenarios. The following are available:
a) Deliveries
Here you are tasked to drive a delivery van and must make deliveries within a specified
time. If you are successful, a truck will be made available that you must use to drive to...