Lab 3.5.4 Subnetting Scenario 3

Lab 3.5.4: Subnetting Scenario 3

Learning Objectives:
• Determine the number of subnets needed.
• Determine the number of hosts needed.
• Design an appropriate addressing scheme.
• Conductresearch to find a possible solution.
Scenario
In this lab, you have been given the network address 192.168.1.0/24 to subnet and provide the IP addressing for the network shown in the Topology Diagram.The network has the following addressing requirements:
• The Branch 1 LAN 1 will require 15 host IP addresses.
• The Branch 1 LAN 2 will require 15 host IP addresses.
• The Branch 2 LAN 1 willrequire 15 host IP addresses.
• The Branch 2 LAN 2 will require 15 host IP addresses.
• The HQ LAN will require 30 host IP addresses.
• The Link from HQ to Branch 1 will require an IP address for eachend of the link.
• The Link from HQ to Branch 2 will require an IP address for each end of the link.
• The Link from HQ to Branch 3 will require an IP address for each end of the link.

(Note:Remember that the interfaces of network devices are also host IP addresses and are included in the above addressing requirements.)
Task 1: Examine the Network Requirements.
Examine the networkrequirements and answer the questions below. Keep in mind that IP addresses will be needed for each of the LAN interfaces.

How many subnets are needed? _8

What is the maximum number of IP addressesthat are needed for a single subnet? 30

How many IP addresses are needed for each of the branch LANs? _15_

What is the total number of IP addresses that are needed? _96_

Task 2: Design an IPAddressing Scheme.
Step 1 Subnet the 192.168.1.0/24 network into the appropriate number of subnets.
Can the 192.168.1.0 be subnetted to fit the network requirements? _si_

If the “number of subnets”requirement is met, what is the maximum number of hosts per subnet? _30_

If the “maximum number of hosts” requirement is met, what is the number of subnets that will be available to use? _8__...