Laboratorio Ccna 9.6.3

{0>Lab 9.6.3:<}100{>Práctica de laboratorio 9.6.3:<0} {0>EIGRP Troubleshooting Lab (Instructor Version)<}96{>Práctica de laboratorio de resolución de problemas de EIGRP<0}
{0>Topology Diagram <}100{>Diagrama de topología<0}

{0>Addressing Table<}100{>Tabla de direccionamiento<0}
{0>Device<}100{>Dispositivo<0} |{0>Interface<}100{>Interfaz<0} | {0>IP Address<}100{>Dirección IP<0} | {0>Subnet Mask<}100{>Máscara de subred<0} | {0>Default Gateway<}100{>Gateway por defecto<0} |
{0>HQ<}100{>HQ<0} | {0>Fa0/0<}100{>Fa0/0<0} | 172.18.64.1 | 255.255.192.0 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/0<}100{>S0/0/0<0} | 209.165.202.129 |255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/1<}100{>S0/0/1<0} | 209.165.202.133 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
{0>BRANCH1<}100{>BRANCH1<0} | {0>Fa0/0<}100{>Fa0/0<0} | 172.18.129.1 | 255.255.255.240 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/0<}100{>S0/0/0<0} |209.165.202.130 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/1<}100{>S0/0/1<0} | 209.165.202.137 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
{0>BRANCH2<}100{>BRANCH2<0} | {0>Fa0/0<}100{>Fa0/0<0} | 172.18.128.1 | 255.255.255.0 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/0<}100{>S0/0/0<0} |209.165.202.138 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
| {0>S0/0/1<}100{>S0/0/1<0} | 209.165.202.134 | 255.255.255.252 | {0>N/A<}100{>No aplicable<0} |
{0>PC1<}100{>PC1<0} | {0>NIC<}100{>NIC<0} | 172.18.129.14 | 255.255.255.240 | 172.18.129.1 |
{0>PC2<}100{>PC2<0} | {0>NIC<}100{>NIC<0} | 172.18.100.100 |255.255.192.0 | 172.18.64.1 |
{0>PC3<}100{>PC3<0} | {0>NIC<}100{>NIC<0} | 172.18.128.10 | 255.255.255.0 | 172.18.128.1 |

{0>Learning Objectives<}100{>Objetivos de aprendizaje<0}
{0>Upon completion of this lab, you will be able to:<}100{>Al completar esta práctica de laboratorio, usted podrá:<0}
{0>Cable a network according to the TopologyDiagram.<}100{>Conectar una red de acuerdo con el Diagrama de topología.<0}
{0>Erase the startup configuration and reload a router to the default state.<}100{>Eliminar la configuración de inicio y recargar un router al estado por defecto.<0}
{0>Load the routers with supplied scripts.<}100{>Cargar los routers con los guiones provistos.<0}
{0>Discover wherecommunication is not possible.<}100{>Descubrir cuándo no es posible la comunicación.<0}
{0>Gather information about the misconfigured portion of the network along with any other errors.<}100{>Recopilar información sobre la porción de la red mal configurada, junto con otros errores.<0}
{0>Analyze information to determine why communication is not possible.<}100{>Analizarla información para determinar por qué no es posible la comunicación.<0}
{0>Propose solutions to network errors.<}100{>Proponer soluciones para los errores de red.<0}
{0>Implement solutions to network errors.<}100{>Implementar soluciones para los errores de red.<0}
{0>Document the corrected network.<}100{>Documentar la red corregida.<0}{0>Scenario<}100{>Escenario<0}
{0>In this lab, you will begin by loading configuration scripts on each of the routers.<}100{>En esta práctica de laboratorio comenzará cargando guiones de configuración en cada uno de los routers.<0} {0>These scripts contain errors that will prevent end-to-end communication across the network.<}100{>Estos guiones contienen errores que impedirán la...