Lala

R__e_s_e_r_v_o_i_r _F__i_l_l _F__i_l_t_e_r _M__o_d_u_l_e _I__n_s_t_a_l_l_a_t_i_o_n (Fig. 201)
A. Consumable Materials
(1) D00567 Skydrol Assembly Lube - MCS 352B
(2) D00568 Fluid - Hydraulic, BMS 3-11
B. References
(1) 12-12-00/301, Hydraulic Reservoir
C. Access
(1) Location Zone
217 Main Wheel Well, RH
D. Procedure
S 642-026
(1) Apply assembly lube or hydraulic fluid to the O-ringsand the
unions.
S 432-027
(2) Install the O-rings and unions in the inlet and outlet ports.
S 422-028
(3) Put the filter module in its mounting position.
S 432-029
(4) Install the mounting bolts.
S 432-030
(5) Connect the hydraulic lines to the inlet and outlet ports.
S 212-031
(6) Make sure there is a lockwire installed on the filter bowl.
S 612-032
(7) Do the servicing for thehydraulic reservoirs (Ref 12-12-00/301).
S 792-033
(8) Examine the filter module and connections for leaks.
TASK 29-18-21-002-011
4 . R__e_s_e_r_v_o_i_r _F__i_l_l _F__i_l_t_e_r _R__e_m_o_v_a_l (Fig. 201)
A. Access
(1) Location Zone
217 Main Wheel Well, RH
B. Procedure
S 862-020
(1) Put the reservoir fill selector valve to the CLOSED position.
EFFECTIVITY
oe29-18-21
ALL oe
oe 01 Page 204
oe Jul 12/06
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A737-300/400/500
MAINTENANCE MANUAL
S 022-021
(2) Remove the filter bowl with the filter element.
S 022-022
(3) Discard the filter element.
S 162-023
(4) Clean the filter bowl.
TASK 29-18-21-402-012
5 . R__e_s_e_r_v_o_i_r _F__i_l_l _F__i_l_t_e_r_I__n_s_t_a_l_l_a_t_i_o_n (Fig. 201)
A. Consumable Materials
(1) D00567 Skydrol Assembly Lube - MCS 352B
(2) D00568 Fluid - Hydraulic, BMS 3-11
B. References
(1) 12-12-00/301, Hydraulic Reservoir
C. Access
(1) Location Zone
217 Main Wheel Well, RH
D. Procedure
S 642-014
(1) Apply assembly lube or hydraulic fluid to the O-rings, backup rings
and filter bowl threads.
S 432-015
(2) Install the backupring and O-ring in the groove in the top end of
the filter element.
S 432-016
(3) Install the backup ring, O-ring, and the backup ring in the groove
in the filter head.
S 422-025
(4) Put the filter element in the filter bowl.
EFFECTIVITY
oe 29-18-21
ALL oe
oe 01 Page 205
oe Jul 12/06
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title pagefor details.
A737-300/400/500
MAINTENANCE MANUAL
S 422-024
(5) Install the filter bowl into the filter head.
S 432-017
(6) Tighten the filter bowl to 50-75 pound-inches torque.
S 432-018
(7) Install the lockwire.
S 612-019
(8) Do the servicing for the hydraulic reservoirs (Ref 12-12-00/301).
S 792-013
(9) Examine the filter for leaks.
EFFECTIVITY
oe29-18-21
ALL oe
oe 01 Page 206
oe Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A737-300/400/500
MAINTENANCE MANUAL
R_E_S_E_R_V_O_I_R_ _F_I_L_L_ _S_E_L_E_C_T_O_R_ _V_A_L_V_E_ _-_ _R_E_M_O_V_A_L_/_I_N_S_T_A_L_L_A_T_I_O_N_
1 . G__e_n_e_r_a_l
A. There are two tasks in this procedure. There is a task for the removal
and a task for the installationof the reservoir fill selector valve.
TASK 29-18-31-004-002
2 . R__e_s_e_r_v_o_i_r _F__i_l_l _S__e_l_e_c_t_o_r _V__a_l_v_e _R__e_m_o_v_a_l (Fig. 401)
A. Standard Tools and Equipment
(1) Container to catch hydraulic fluid
B. References
(1) 12-40-00/201, Cleaning and Washing
(2) 29-09-00/201, Hydraulic Reservoir Pressurization System
C. Access
(1) Location Zone
217 Main Wheel Well, RH
D.Procedure
S 864-003
(1) Release pressure from system A and B reservoirs (Ref 29-09-00/201).
S 034-004
(2) Disconnect the hydraulic lines at the fill selector.
S 684-005
(3) Drain hydraulic fluid into a container.
S 164-006
(4) Clean all hydraulic fluid from the installation area if it is
necessary (Ref 12-40-00/201).
S 434-007
(5) Install plugs to the hydraulic lines.
S 034-008
(6)...