Licenciado

i900D
i905D
PIXUS 900PD
SERVICE MANUAL
Revision 0

QY8-1394-000

COPYRIGHT©2003 CANON INC. CANON PIXUS 900PD / i900D / i905D 092003 XX 0.00-0

Scope
This manual has been issued by Canon Inc., to provide the service technicians of this product with the
information necessary for qualified persons to learn technical theory, installation, maintenance, and repair of
products. The manualcovers information applicable in all regions where the product is sold. For this reason, it
may contain information that is not applicable to your region.
Revision
This manual could include technical inaccuracies or typographical errors due to improvements or changes
made to the product. When changes are made to the contents of the manual, Canon will release technical
information whennecessary. When substantial changes are made to the contents of the manual, Canon will
issue a revised edition.
The following do not apply if they do not conform to the laws and regulations of the region where the manual or
product is used:

Trademarks
Product and brand names appearing in this manual are registered trademarks or trademarks of the respective
holders.
Copyright
All rightsreserved. No parts of this manual may be reproduced in any form or by any means or translated into
another language without the written permission of Canon Inc., except in the case of internal business use.
Copyright 2003 by Canon Inc.
CANON INC.
Inkjet Products Quality Assurance Div.
16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki, Kanagawa 213-8512, Japan

I.

MANUAL OUTLINE

This manualconsists of the following three parts to provide information necessary to service the i900D/i905D:
Part 1: Maintenance
Information on maintenance and troubleshooting of the i900D/i905D
Part 2: Technical Reference
New technology and technical information such as FAQ’s (Frequently Asked Questions) of the i900D/i905D
Part 3: Appendix
Block diagrams and pin layouts of the i900D/i905D
Reference:This manual does not provide sufficient information of disassembly and reassembly procedures. Refer to the
graphics in the separate Parts Catalog.

II.
Page
1-1

1-2
1-3

1-4
1-5
1-6
1-7
1-8
1-10
1-12

1-20

1-22

TABLE OF CONTENTS
Part 1: MAINTENANCE
1.

MAINTENANCE
1.1 Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement
Consumables by ServiceEngineer
1.2 Customer Maintenance
1.3 Product Life
1.4 Special Tools
1.5 Serial Number Location
2. LIST OF ERROR DISPLAY / INDICATION
2.1 Operator Call Errors (by LED Blinking in Orange)
2.2 Service Call Errors
2.3 Warnings
2.4 Troubleshooting by Symptom
3. REPAIR
3.1 Notes on Service Part Replacement (and Disassembling / Reassembling)
3.2 Special Notes on Repair Servicing
3.3Adjustment / Settings
(1) Paper feed motor adjustment
(2) Gear phase adjustment
(3) Grease application
(4) Waste ink counter setting
(5) User mode
(6) Service mode
(7) Flash ROM upgrade
3.4 Verification Items
(1) Service test print
(2) EEPROM information print
4. PRINTER TRANSPORTATION METHOD

Part 2: TECHNICAL REFERENCE
2-1
2-4
2-5
2-7

1.
2.
3.
4.

2-8
2-10
2-11
2-12
2-142-15
2-16
2-17
2-18
2-19
2-21
2-22
2-23

5.

NEW TECHNOLOGIES
CLEANING MODE AND AMOUNT OF INK PURGED
PRINT MODE
PHOTO DIRECT PRINT FUNCTION
4.1 Host PC Memory Card Access Function with the Memory Card Startup Utility
4.2 Memory Card Direct Printing Function
4.3 File Search
4.4 File Sort
4.5 Date Print
4.6 Bubble Jet Direct Function
4.7 PictBridge Function
4.8 ExclusiveProcesses
4.9 LCD Viewer
4.10 Card Slot-related Operations and Display
4.11 DPOF Settings in the Memory Card Direct Printing Function
4.12 Print Layout (Details)
4.13 Date Print Specifications
4-14 Photo Number Printing Specifications
FAQ (Specific Problems and Solutions)

Part 3:
3-1
3-2
3-6
3-7
3-8
3-12

1.
2.

APPENDIX

BLOCK DIAGRAM
CONNECTOR LOCATION AND PIN LAYOUT
2.1 Logic...