Licenciatura

Empresa: Corporativo Araza Servicie
Creado Por: Luz Castro
Teléfono: 47483931
Fax:
Datos:
Posición

-

Contar Descripción
1

DME 60-10 AP

Advierta! la foto puede diferir del actualproducto

Código: 96549506
Compact, positive displacement diaphragm dosing pump with integrated variable-speed motor drive
in an IP65 plastic enclosure.
The pump is designed for optimumuser-friendliness, accuracy and reliability and is equipped with a
logical control panel with one-touch buttons and a multi-language backlight display.
The capacity to be dosed in each function is set directlyin l/hour, ml/hour or USgal/hour.
For enhanced accuracy, the pump can be calibrated to the actual installation by means of a simple
calibration function.
The turndown ratio is 1 to 800 withunchanged accuracy and more uniform dosage with reduced
pulsation throughout the capacity range.
The pump is also equipped with a maximum capacity function (100 %) that allows the pump to work
for apreset time at maximum capacity for priming or ordinary maintenance without changing pump
settings.
The wetted parts are the following:
·Pump head
·PTFE-coated diaphragm
·Ball valves
·Manual bleedvalve.
Possible operating modes:
·Manual dosing with direct setting in ml/hour, l/hour or USgal/hour
·External pulse control from external controller or water meter with direct setting in ml/pulse·External analog 4-20, 20-4, 0-20 and 20-0 mA control with possibility of adjusting the pump capacity
at maximum signal
·Timer-based batch function (internal timer)
·Pulse-based batch function(external pulse).
Other features:
·Built-in module for bus communication with PROFIBUS DP systems. The module enables remote
monitoring and setting via this fieldbus system.
·On-site calibrationfunction for calibrating the pump to the actual installation
·Anti-cavitation function for high-viscosity, degassing liquids or long suction lines
·Maximum capacity limitation
·Counters for numbers of...