Lipase

This article was downloaded by: [Centro de Invest y Asist en Tec y Diseno]
On: 22 March 2012, At: 12:01
Publisher: Taylor & Francis
Informa Ltd Registered in England and Wales Registered Number: 1072954 Registered office: Mortimer
House, 37-41 Mortimer Street, London W1T 3JH, UK

Instrumentation Science & Technology
Publication details, including instructions for authors and subscriptioninformation:
http://www.tandfonline.com/loi/list20

SIMPLE LABORATORY-MADE AUTOMATED SEQUENTIAL
INJECTION ANALYSIS (SIA) DEVICE. II. SIA
OPERATIONAL SOFTWARE BASED ON LABVIEW®
PROGRAMMING LANGUAGE
a

a

a

a

Hana Sklenarova , Antonín Svoboda , Petr Solich , Miroslav Polasek & Rolf Karlícek
a

Laboratory of Flow Analysis, Department of Analytical Chemistry, Faculty of Pharmacy,Charles University and the Research Centre LN00B125, Heyrovskeho 1203, CZ-500 05
Hradec Kralove, Czech Republic
Available online: 06 Feb 2007

To cite this article: Hana Sklenarova, Antonín Svoboda, Petr Solich, Miroslav Polasek & Rolf Karlícek (2002): SIMPLE
LABORATORY-MADE AUTOMATED SEQUENTIAL INJECTION ANALYSIS (SIA) DEVICE. II. SIA OPERATIONAL SOFTWARE BASED ON
LABVIEW® PROGRAMMINGLANGUAGE, Instrumentation Science & Technology, 30:3, 353-360
To link to this article: http://dx.doi.org/10.1081/CI-120013513

PLEASE SCROLL DOWN FOR ARTICLE
Full terms and conditions of use: http://www.tandfonline.com/page/terms-and-conditions
This article may be used for research, teaching, and private study purposes. Any substantial or systematic
reproduction, redistribution, reselling,loan, sub-licensing, systematic supply, or distribution in any form to
anyone is expressly forbidden.
The publisher does not give any warranty express or implied or make any representation that the contents
will be complete or accurate or up to date. The accuracy of any instructions, formulae, and drug doses
should be independently verified with primary sources. The publisher shall not be liablefor any loss, actions,
claims, proceedings, demand, or costs or damages whatsoever or howsoever caused arising directly or
indirectly in connection with or arising out of the use of this material.

a

MARCEL DEKKER, INC. • 270 MADISON AVENUE • NEW YORK, NY 10016
©2002 Marcel Dekker, Inc. All rights reserved. This material may not be used or reproduced in any form without the expresswritten permission of Marcel Dekker, Inc.

Downloaded by [Centro de Invest y Asist en Tec y Diseno] at 12:01 22 March 2012

INSTRUMENTATION SCIENCE & TECHNOLOGY
Vol. 30, No. 3, pp. 353–360, 2002

SIMPLE LABORATORY-MADE AUTOMATED
SEQUENTIAL INJECTION ANALYSIS (SIA)
DEVICE. II. SIA OPERATIONAL SOFTWARE
BASED ON LABVIEW1 PROGRAMMING
LANGUAGE
Hana Sklenarova,* Antonın Svoboda, Petr Solich,
´Miroslav Polasek, and Rolf Karlıcek
´
Laboratory of Flow Analysis, Department of Analytical Chemistry,
Faculty of Pharmacy, Charles University and the Research Centre
LN00B125, Heyrovskeho 1203, CZ-500 05 Hradec Kralove,
Czech Republic

ABSTRACT
The paper presented deals with the development of an automated computeraided sequential injection analysis (SIA) system and its application tolaboratory automation. In Part I, hardware and technical parameters of the SIA
system were described. Part II introduces original lab-developed operational
software (FaFSIA), enabling one to control the cited SIA system and to
process experimental data, including their presentation. The software, based
on graphic programming language LabVIEW, is described in detail.

INTRODUCTIONSequential injection analysis (SIA) belongs to the group of versatile, fully
automated analytical techniques. Basic principles and hardware units of the SIA
systems, development of hardware components, and SIA applications were

*Corresponding author. E-mail: sklenarova@faf.cuni.cz
353
DOI: 10.1081=CI-120013513
Copyright # 2002 by Marcel Dekker, Inc.

1073-9149 (Print); 1525-6030 (Online)...