Manual Btwin

Operator
Operator Manual

GB
GB

179502(03/06)1.2

Dimensions
Dimensions

GB
GB

INTRODUCTION
INTRODUCTION
This publication is provided solely as a guide for individuals who have purchased the METTLER
TOLEDO bTwin scale product.

©

Mettler-Toledo, Inc. 2004

No part of this manual may be reproduced or transmitted in any form or by any means,
electronic ormechanical, including photocopying and recording, for any purpose without the
expressed written permission of Mettler-Toledo, Inc.

METTLER
METTLER TOLEDO RESERVES THE RIGHT TO MAKE REFINEMENTS OR CHANGES
WITHOUT NOTICE.

bTwin
bTwin Operator Manual

Precautions
Precautions
WARNING
READ this manual
BEFORE operating or
servicing this equipment.

FOLLOW these
instructions carefully.SAVE this manual for
future reference.

DO NOT allow untrained
personnel to operate,
clean, inspect, maintain,
service, or tamper with
this equipment.

ALWAYS DISCONNECT
this equipment from the
power source before
cleaning or performing
maintenance.

CALL METTLER TOLEDO
for parts, information, and
service.

ONLY PERMIT QUALIFIED PERSONNEL TO SERVICE
THIS EQUIPMENT.EXERCISE CARE WHEN MAKING
CHECKS, TESTS AND ADJUSTMENTS THAT MUST BE
MADE WITH POWER ON. FAILING TO OBSERVE
THESE PRECAUTIONS CAN RESULT IN BODILY
HARM.

WARNING
FOR CONTINUED PROTECTION AGAINST SHOCK
HAZARD CONNECT TO PROPERLY GROUNDED
OUTLET ONLY. DO NOT REMOVE THE GROUND
PRONG.

WARNING
DISCONNECT ALL POWER TO THIS UNIT BEFORE
REMOVING THE FUSE OR SERVICING. FAILURE TO DO
SO MAYRESULT IN BODILY INJURY OR PROPERTY
DAMAGE.

CAUTION
BEFORE CONNECTING/DISCONNECTING ANY INTERNAL ELECTRONIC
COMPONENTS OR INTERCONNECTING WIRING BETWEEN ELECTRONIC
EQUIPMENT ALWAYS REMOVE POWER AND WAIT AT LEAST THIRTY (30)
SECONDS BEFORE ANY CONNECTIONS OR DISCONNECTIONS ARE MADE.
FAILURE TO OBSERVE THESE PRECAUTIONS COULD RESULT IN DAMAGE TO
OR DESTRUCTION OF THE EQUIPMENT ORBODILY HARM.

CAUTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE
DEVICES.

bTwin
bTwin Operator Manual

GB
GB
GEO-Value
GEOGEO
GEO-Value table

The GEO-Value of verified balances explains for which location of use the balance has been verified.
This GEO-Value is shown on the balance total price display shortly after the balance is turned on.
Further details areshown in the “GEO-Value table“ below.
Country
Austria
Belgium
Bulgaria
Croatia
Czechia
Denmark
France
Finland
Germany
Greece
Hungary
Ireland
Iceland
Italy
Latvia
Luxembourg
Liechtenstein
Lithuania
Netherland
Norway
Poland
Portugal
Romania
Sweden
Switzerland
Slovakia
Slovenia
Spain
Turkey
United Kingdom

Geo-Width
46°22‘ – 49°01‘
49°30‘ – 51°30‘
41°41‘ – 44°13‘42°24‘ – 46°32‘
48°34‘ – 51°03‘
54°34‘ – 57°45‘
41°20‘ – 51°00‘
59°48‘ – 70°05‘
47°00‘ – 55°00‘
34°48‘ – 41°45‘
45°45‘ – 48°35‘
51°05 – 55°05‘
63°17‘ – 67°09‘
35°47‘ - 47°05‘
55°30 – 58°04‘
49°27‘ – 50°11‘
47°03‘ – 47°14‘
53°54‘ – 56°24‘
50°46‘ – 53°32‘
57°57‘ - 71°11‘
49°00‘ – 54°30‘
36°58‘ – 42°10‘
43°37‘ – 48°15‘
55°20‘ – 69°04‘
45°49‘ – 47°49‘
47°44‘ – 49°46‘45°26‘ – 46°35‘
36°00‘ – 43°47‘
35°51‘ – 42°06‘
49°00‘ – 62°00‘

Geo-Value (default)
18
20
16
18
20
23
19
25
20
15
19
22
26
17
23
20
18
22
20
24
21
15
18
24
18
19
18
15
16
21

bTwin
bTwin Operator Manual

Contents
Contents
1

Introduction................................................................................................................................
................................................................
Introduction ................................................................................................................................ 1
1.1
1.2
1.3

2

Installation.....................................................................................................................................