Manual Canon Xl2

PUB. DIE-211

DIGITAL VIDEO CAMCORDER

Instruction Manual

English

Introduction

Preparation

Recording

Playback

Editing

Mini

Digital Video Cassette

Additional Information

PAL

Important Usage Instructions
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICEPERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE. For Users in the UK When replacing the fuse only a correctly rated approvedtype should be used and be sure to re-fit the fuse cover. CA-920 identification plate is located on the bottom. • Use of CV-150F/CV-250F DV cable is necessary to comply with the technical requirement of EMC Directive.

2

Using this Manual
Thank you for purchasing the Canon XL2. Please read this manual carefully before you use the camcorder and retain it for future reference.

ESymbols and References Used in This Manual
❍ ❍ : Precautions related to the camcorder operation. : Additional topics that complement the basic operating procedures. ❍ : Reference page number. ❍ Capital letters are used to refer to buttons on the camcorder or the wireless controller. ❍ [ ] are used to refer to menu items displayed on the screen. ❍ The supplied 20× L IS Zoom Lens XL5.4-108 mm is referred to as “20× L IS Lens”. ❍ The illustrations show the camcorder attached with the 20× L IS Lens.

Setting the Time Zone, Date and Time
Set the time zone, date and time when you first start using your camcorder, or when you have replaced the backup battery.

Setting the Time Zone/Daylight Saving Time

Operating modes
SYSTEM T.ZONE/DST•••PARIS

Introduction(

24)

Menu item showing at its default position

1. Press the MENU button to open the menu. 2. Turn the SET dial to select [SYSTEM] and press the SET dial. 3. Turn the SET dial to select [T.ZONE/DST] and press the SET dial.
The time zone setting appears (see table on the next page). The default setting is Paris.

4. Turn the SET dial to select the setting option thatrepresents your time zone and press the SET dial.
To adjust for daylight saving time, select the time zone with the U next to the area.

Setting the Date and Time

❍ Available functions depend on the operating mode and are indicated as follows: : Function can be used in this mode. : Function cannot be used in this mode.

Trademark Acknowledgements
• • • • Canon is a registered trademarksof Canon Inc. D is a trademark. m is a trademark. Windows® is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.

3

Contents
Introduction
Important Usage Instructions..............................................................................................................................2 Using this Manual ................................................................................................................................................3 Checking Supplied Accessories............................................................................................................................6 Components Guide ..............................................................................................................................................7

Preparation
Preparing the Power Supply ..............................................................................................................................11 Installing the Backup Battery...