Manual Catia Audi
www.dicksonsham.com
CATIA V5 Surface-modeling
(Tutorial 8- Rebuild Audi R8)
Not For Commercial Use
Surface-modeling Design with a Master Model Design in Context
A- 1
Version 1a- Oct 2010 Non-Commercial Use Written by Dickson Sham
CATIA V5R19 - surface modeling – Rebuild Audi R8
www.dicksonsham.com
Design Intent
Hard fillet Hard filletPictureSource: www.audi.com/r8
Fillet disappears
Fillet disappears
soft fillet Hard fillet
Grab photos from internet (in different views)
A- 2
Version 1a- Oct 2010 Non-Commercial Use Written by Dickson Sham
CATIA V5R19 - surface modeling – Rebuild Audi R8
www.dicksonsham.com
Not For Commercial Use
Wheelbase = 2650 Length = 4431 Width, Max w/o mirrors = 1904 Height = 1249 Tread Width, Front =1632 Tread Width, Rear = 1595
Front Wheel Size (in) = 19 x 8.5 Rear Wheel Size (in) = 19x 11.0 Front Tire Size = P235/ 35R19 Rear Tire Size = P305 / 30R19
A- 3
Version 1a- Oct 2010 Non-Commercial Use Written by Dickson Sham
CATIA V5R19 - surface modeling – Rebuild Audi R8
www.dicksonsham.com
Surface-modeling
Tutorial 8A
– – Insert 2d pictures and reposition them on offset planes Create 3Dcontrol curves
Design with a Master model
Not For Commercial Use
Tutorial 8B,C, D
– – – – Create the front body of the master model Create the middle body of the master model Create the rear body of the master model Create parting surfaces
Tutorial 8E
– – Split the finished (master) model into separate parts Build more details on each part
Tutorial 8F
– Reassemble them together
Please bereminded that this series of tutorials is designed to demonstrate a design approach with CATIA, rather than the command itself.
A- 4
Version 1a- Oct 2010 Non-Commercial Use Written by Dickson Sham
CATIA V5R19 - surface modeling – Rebuild Audi R8
www.dicksonsham.com
Tutorial 8A
• Create a new project folder (e.g. C:\Car_R8)
Pic1.jpg Pic2.jpg
Before Start: http://models.audiusa.com/r8 • Crop thepicture (972.jpg) into two jpeg files in a square size (just extracting four views: front, left, top & back) • Save the files into the project folder
• • • • • •
Start CATIA File/New/ Part DO NOT SELECT “Hybrid Design” Switch Workbench to Generative Shape Design Insert a geometrical set “reference” Create 4 offset planes
3500mm 6000mm 3500mm
3500mm
A- 5
Version 1a- Oct 2010 Non-Commercial UseWritten by Dickson Sham
CATIA V5R19 - surface modeling – Rebuild Audi R8
www.dicksonsham.com
Tutorial 8A
• • • • • • Create 4 Extruded Surfaces on offset planes (4431mm x 1249mm , start from origin) (2000mm x 1249mm , symmetric) (2000mm x 1249mm , symmetric) (2000mm x 4431mm , start from origin) Apply any material onto each surface, then change the texture to our prepared jpeg files (pic1. jpgor pic2. jpg) Scale & Position the image to match the surface‟s size 4431mm 2000mm
4
1
1249mm 4431mm
1249mm
3
2000mm
2
2000mm
1249mm
•
• •
Make them semi-transparent Set the Geometrical set “Reference” to “Unpickable” A- 6
Non-Commercial Use Written by Dickson Sham
Version 1a- Oct 2010
CATIA V5R19 - surface modeling – Rebuild Audi R8
www.dicksonsham.com
Tutorial 8A
• • •
• • •Switch workbench to “Shape/ Freestyle” Insert a NEW geometrical set “control_curves” Set “Lock Privileged Plane Orientation Parallel to Screen” on compass Create some 3d curves (left side only) No curve blending or trimming Thicken the curves and change color to PINK
Drag a control point to modify the spline
Not For Commercial Use
Just create the left
A- 7
Version 1a- Oct 2010 Non-Commercial UseUse minimum number of control points to create a spline
Written by Dickson Sham
CATIA V5R19 - surface modeling – Rebuild Audi R8
www.dicksonsham.com
Tutorial 8A
Total 19 curves
A- 8
Version 1a- Oct 2010 Non-Commercial Use Written by Dickson Sham
CATIA V5R19 - surface modeling – Rebuild Audi R8
www.dicksonsham.com
Front Body
(master)
• • • • • • •
Tutorial 8B
Switch workbench to...
Regístrate para leer el documento completo.