Manual De Controlador Ptz Generico
INSTRUCTION MANUAL Ver 1.0
Pan, Tilt and Zoom Controller / PTZ-KEY
1 ○ Introduction
Features Components 3 3
2 ○ Installation
System Configuration Parts Description 4 4
3 ○ Protocol and Baud Rate
Overview of Protocol Protocol and Baud Rate Settings 5 6
4 ○ Wiring
Controller Layout Wiring 7 75 ○ Keyboard Functions
Select Camera Set Preset Call Preset Clear Preset Run Cruise Track Stop Cruise Track Set Auto Pan Run Auto Pan Stop Auto Pan Advanced Camera Control 8 8 8 8 8 8 8 9 9 9 9
5 ○ Product Specifications
Pan, Tilt and Zoom Controller / PTZ-KEY
2
Introduction
1
Features
Controller Specification • RS-485 Communication • Numeric LCD Display • Variable Panand Tilt Speed • Multiple Integrated Protocols (Including Pelco D and Pelco P) • Programmable Baud Rate • Up to 255 addressable camera ID • 12v DC
Components
Parts Information
Item PTZ Controller Power Supply
Part No. PTZ-KEY
Description PTZ Controller Keyboard 12v DC Power Supply
Default Components PTZ Controller Keyboard Accessories
Manual
PTZ-KEY Manual
Power SupplyPan, Tilt and Zoom Controller / PTZ-KEY
3
INTRODUCTION Installation
2
System Configuration
Configurations
Part Description
12v DC (Power) • 12v DC (Power) • DIP Switches • RS-485
RS-485 Input for 12vDC power supply Protocol and Baud Rate Selection RS-485 Output
DIP Switches
Pan, Tilt and Zoom Controller / PTZ-KEY
4
Protocol and Baud Rate
3
Protocol andBaud Rate
RS-485 communication RS-485 communication is used to control the camera. Protocol and Baud rate are set using the Dip Switch located on the back on the controller. Each camera connected to the PTZ controller must have a unique address. • Specification • Number of wire • Protocol Standard RS-485 with MAX. 32 Camera Control 2 Wire (D+, D-) Pelco-D, Pelco-P, Samsung, Neon, Hunda600, A01,B01 and Santachi
CODE: Controller Protocol Settings
• When a dip switch is ON, its bit logic is 1 • Dip Switch 7 and 8 are always set to OFF
Pan, Tilt and Zoom Controller / PTZ-KEY
5
Protocol and Baud Rate
ID-CODE : Camera Protocol and Baud Rate Settings
3
This camera supports multiple RS-485 Protocols and Baud Rates. The Baud rate is set separately from the Protocol on theCODE Dipswitch located on the back of the controller. The table below contains a list of protocols supported by the camera and the default baud rate for the protocol. Please note switch 7 and switch 8 are set OFF.
Supported Protocol Pelco D /2400 Pelco P /4800 Pelco P /9600 Samsung Neon Santachi A01 B01 Hunda600
Selection Of Protocols 1st ON OFF OFF ON ON OFF OFF ON ON 2nd ON OFF OFF OFF OFF ONOFF OFF ON 3rd OFF ON ON OFF OFF OFF OFF OFF ON 4th OFF OFF OFF OFF OFF OFF OFF OFF OFF
Default Baud Rates 5th 6th OFF OFF ON OFF OFF ON OFF ON OFF ON OFF ON ON OFF OFF ON OFF ON
Dip Switch settings for configuring the camera to use Pelco D Protocol at 2400 Baud:
Below is a table showing the proper settings of the 5th and 6th dip switch for setting preferred baud rate. Selection OfProtocols 2nd 3rd 4th Baud Rates 5th 6th OFF OFF ON OFF OFF ON ON ON
Baud Rate 2400 4800 9600 19200
1st
Pan, Tilt and Zoom Controller / PTZ-KEY
6
Controller Layout
Wiring:
12v DC
Protocol/Baud Rate
B (-) Output
RS-485 Output
A (+) Output
Pan, Tilt and Zoom Controller / PTZ-KEY
7
Keyboard Functions Wiring
5 4
Keyboard Operation
Select ID of Camera: N +[CAM] Description: N = The address of the PTZ camera you want to take control of. Function: Selects the address of the camera to be controlled.
Set Preset: N + [PRESET] Description: N = Number of preset you wish to set in the camera (1 to 128) Function: Set the specified preset in the camera selected
Call Preset: N + [CALL] Description: N = Number of preset you wish to call in the camera (1...
Regístrate para leer el documento completo.