Manual De Irda welDer T862

IRDA-WELDER User Manual

Model: T862





[pic]

Tai’an Puhui Technology . CO., LTD.
www.Tech168.cn
CATALOGUE
Features…………………………….……………..…………………….2
Technical Parameter and Components………………………………3
T-862 Illustrated Explaining……………………………………………4
(1)The Whole Machine………………………………………………4
(2)Front panel and Rear panel….…………………………………..5
(3)IR Lamp Body(Focus Holder andOthers)…..…………………6
Infrared Work Station Unpacking and Assembly….…………………7
(1)Unpack the packaging……….………………………………….7
(2)Check the items.......................…………………………………7
(3)Install the cell guide...……………………………………………7
(4)Install the steady Ring…..……………………………………….7
(5)Assemble Wholly………………………………………………...7
(6)Connect the Tie Wire of the Lamp and the Iron……………….8
(7)Attach the IRFilter……………………………………………….8
T-862 Operation method………...………………………………….…9
1. Open the machine………..………………………………………9
2. Remove the chip…………..……………………………………10
3. Soldering the chip………………………………..………..……10
4. The use of the 936 searing iron……………………………..11
Maintenance and Warning.…………………………………..………12

Features
➢ Unlike Air Re-Work systems, The T-862 uses an Infrared source andoptics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.


➢ Infrared soldering technology with independent exploration capabilities via the focus lenses which is included in the package.


➢ Technician focused infrared heat is easy to target most component removal/replacement and re-work.


➢ The Workstation has a 80 X120mma 600W controlled Pre-heating System.

➢ Infrared heat source bulbs are long-lived, in-expensive and easily replaced.


➢ Processor controlled set-point regulated temperatures with thermocouple feed-back.

➢ Integrated and adjustable Infrared (IR) eye protection.

➢ Can suitable for the entire component, especially Micro BGA component.


➢ The T-862 system alsocontains a temperature controlled touch-up iron and stand.


➢ Extra soldering tools are not necessary to solder/unsolder and re-work Surface Mount Technology (SMT) components18*18cm in size


➢ Training is illustrated in factory provided video.







Technical parameter

|Working Voltage |AC220V/50HzAC110V/60Hz |
|Output power |600W |
|Infra-red lamp body temperature adjustable |100℃-350℃ |
|Preheating dish temperature adjustable |60℃-200℃|




Components
|Description |Quantity |Illustration |
|T-862 Chassis |1 | |
|PCB Board holder |1 | |
|936 Searing-iron|1 | |
|936 searing-iron rack |1 | |
|Lamp Body and Lens(D=28mm) |1 | |
|Eye protection(IR Filter) |1 | ||Cell guide |1 | |
|Focus holder |1 | |
|Focus holder control knob |1 | |
|Fasten nut for focus holder |1...