Manual de medidor de conductividad cld132

Operating Instructions

Smartec S CLD132
Conductivity Measuring System

BA207C/07/en/09.04 51501595 Software version 1.00 or later

Brief overview
This overview explains how to use these Operating Instructions to commission your measuring system quickly and safely. Safety instructions

→ Page 5 ff. → Page 6 ff.

General safety instructions Explanation of the warning symbols You canfind special instructions at the appropriate position in the chapter in question. The significance is indicated with the icons Warning #, Caution " and Note !. ▼ Installation

→ Page 10 ff. → Page 15 ff.

Here, you can find information on installation conditions and the dimensions of the measuring system. These pages explain how to install the measuring system ▼ Wiring

→ Page 18 ff.

Here,you can find out how to connect your measuring system. You also find information on how to connect the CLS52 sensor if you are using a separate version. ▼ Operation

→ → → →

Page 23 Page 26 Page 33 ff. Page 51 ff.

The display and operating elements are described here. The operating concept is described here. The system configuration is explained here. You can find information on how tocalibrate the sensor here. ▼ Maintenance

→ → → →

Page 54 ff. Page 59 ff. Page 61 ff. Page 67 ff.

Here, you can find information on the maintenance of the measuring point. Accessories which can be supplied for the measuring system are listed on the pages indicated. Use the trouble-shooting information given here if your system should not work properly. Spare parts that can be delivered and asystem overview are listed on these pages. ▼ Technical data

→ Page 73 → Page 73 ff.

Dimensions Process conditions, weight, material ▼ Index

→ Page 80 ff.

The index helps you to find information and important terms easily and quickly.

Endress+Hauser

Smartec S CLD132

Table of contents
1
1.1 1.2 1.3 1.4 1.5

Safety instructions . . . . . . . . . . . . . . . . 5
Designateduse . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation, commissioning and operation . . . . . . . . Operational safety . . . . . . . . . . . . . . . . . . . . . . . . . . Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notes on safety conventions and symbols . . . . . . . . . 5 5 5 6 6

6.4

2
2.1

Identification . . . . . . . . . . . . . . . .. . . . 7
Device designation . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.1 Nameplate . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.2 Product structure Smartec S CLD132 . . . . . 2.1.3 Basic version and function extensions . . . . . Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . Certificates and approvals . . . . . . . . . . . . . . . . . . . . 7 7 7 8 88 6.5

2.2 2.3

3
3.1 3.2 3.3

Installation . . . . . . . . . . . . . . . . . . . . . . 9
Quick installation guide . . . . . . . . . . . . . . . . . . . . . . 9 3.1.1 Measuring system . . . . . . . . . . . . . . . . . . . . 9 Incoming acceptance, transport, storage . . . . . . . . . 10 Installation conditions . . . . . . . . . . . . . . . . . . . . . . 10 3.3.1 Notes on installation . . .. . . . . . . . . . . . . . 10 3.3.2 CLD132 separate version . . . . . . . . . . . . . . 11 3.3.3 CLD 132 compact version . . . . . . . . . . . . . 13 Installation instructions . . . . . . . . . . . . . . . . . . . . . 15 3.4.1 Mounting CLD132 separate version . . . . . . 15 3.4.2 Mounting CLD132 compact version or CLS52 sensor for separate version . . . . . . . 16 Post-installation check . . . .. . . . . . . . . . . . . . . . . . 17

Instrument configuration . . . . . . . . . . . . . . . . . . . . 6.4.1 Setup 1 (conductivity, concentration) . . . . . 6.4.2 Setup 2 (temperature) . . . . . . . . . . . . . . . . 6.4.3 Current outputs . . . . . . . . . . . . . . . . . . . . . 6.4.4 Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.4.5 Check . . . . . . . . . . . . . . . ....