Manual Debasculas Camionera

Operator Manual

FB3000 Series Instrument ™ With Intalogix Technology
FB3000 IN/OUT Program
Supplemental Document to the FB3000 Kernel Program Manual 51147

51149
© 2007 by Fancor All rights reserved

Revision 1 09/07

Amendment Record

FB3000 Series Instrument With Intalogix™ Technology FB3000 IN/OUT Program Operators Manual
DOCUMENT 51149
Manufactured by Fairbanks Scales Inc.821 Locust Street Kansas City, Missouri 64106

Created Revision 0 Revision 1

07/2007 08/2007 09/2007 Preliminary Release Documentation Release

09/07

3

51149 Rev. 1

© Copyright 2007
This document contains proprietary information protected by copyright. All rights are reserved; no part of this manual may be reproduced, copied, translated or transmitted in any form or by anymeans without prior written permission of the manufacturer.

Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International Business Machine Corporation. Award is a trademark of Award Software International, Inc. RTL is a trademark of Realtek SemiConductor Co., Ltd. VIA is a trademark of VIA Technologies, Inc. Winbond is a trademark of Winbond Technology, Inc. CF andCompactFlash are trademarks of ScanDisk Corporation. Microsoft, Windows, Windows NT, Windows XP, and MS-DOS are either trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned herein are used for identification purpose only and may be trademarks and/or registered trademarks of their respective companies.

Disclaimer
Every effort has been made to providecomplete and accurate information in this manual. However, although this manual may include a specifically identified warranty notice for the product, Fairbanks Scales makes no representations or warranties with respect to the contents of this manual, and reserves the right to make changes to this manual without notice when and as improvements are made. It is the responsibility of the requestingparty to develop, maintain, install, and connect networking devices and general network connectivity as it applies to the originating party’s network. No warranty or guarantee, expressed or implied, concerning the network, its design, its installation, or operational characteristics has been offered by Fairbanks Scales. Fairbanks Scales shall not be liable for any loss, damage, cost of repairs,incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence, or strict liability arising in connection with the design, development, installation, or use of an intended network.

09/07

4

51149 Rev. 1

Table of Contents
SECTION 1: GENERAL INFORMATION .................................................................. 6Introduction.......................................................................................................................... 6 Additional Information.......................................................................................................... 6 In/Out Program Description ................................................................................................. 7SECTION 2: PROGRAMMING ................................................................................... 8
Menu Navigation.................................................................................................................. 8 Defining the Main Menus ................................................................................................... 10
Backing Up Changes?.................................................................................................................. 11 Saving Changes to a Folder ......................................................................................................... 11 Additional Programming Tips........................................................................................................ 11 Options Menu...