Manual Dodge

Gearing Reference Guide TORQUE-ARM II TORQUE-ARM MAXUM Concentric Reducer TIGEAR-2

SELECTION/DIMENSIONS
TORQUE-ARM Shaft Mount Speed Reducers
TXT1 - DOUBLE REDUCTION TAPER BUSHED
7.06 4.50 ✼

7.13 1.91 3.75 9.94 3.18 3.25 2.03

1.30 END OF BRG. ON DRIVEN SHAFT

1-7/16" MAX.

3.71
3/4" DIA. SHAFT 3/16 X 3/32 X 2-11/16" K.S.

.38 BOLT 23.81 MIN. 29.63 MAX.

90f 3.30 .94 2.672.50

✼ 1.25" MIN. DISTANCE FOR BUSHING SCREW REMOVAL

3.55 1.06

TXT1 - DOUBLE REDUCTION STRAIGHT BORE
5.62 4.50 2.75 3.75 9.94 3.18 3.71
3/4" DIA SHAFT 3/16 X 3/32 X 1-15/16" K.S.

7.13 1.91

.58 END OF BRG. ON DRIVEN SHAFT 1-7/16" MAX.

✼

3.19

.38 BOLT 23.81 MIN. 29.63 MAX.

90f

3.29 .94

2.67

2.83 2.50 1.06

FEATURES/BENEFITS PAGE G2-3

NOMENCLATURE PAGE G2-11SELECTION PAGE G2-13

RELATED PRODUCTS PAGE G2-152

G2-28

SELECTION/DIMENSIONS
TORQUE-ARM Shaft Mount Speed Reducers
TXT1 Taper Bushed Reducers ■ k Reducer Size Part Number TXT109T 241092 TXT115T 241065 TXT125T 241066 AGMA Code 107D09 107D15 107D25 Actual Ratio 9.44 15.35 25.64 Weight 45 45 45 TXT1 Accessories Description TA1M Standard Motor Mount (56T-215T) TAB1 Bottom Motor Mount(56T-215T) TXT1 Backstop Assembly Optional Filter Breather (3/8-18 NPT) TXT1-D TA Reducer Belt Guard (56T-215T) TXT1 Taconite Auxiliary Seal Kit ♥ Weight 45 45 45 Part Number 241391 241421 242101 430048 241395 272515 Weight 37.3 34 .8 .2 30 4.40

TXT1 Straight Bore Reducers ■ k Reducer Size Part Number TXT109S 241327 ♣ TXT115S 241073 TXT125S 241074 AGMA Code 107D09 107D15 107D25 Actual Ratio 9.4415.35 25.64

TXT1 Bushing Assemblies ● Part Number Tapered Straight Bore Bushing Bushing 241292 ◆ 241294 241290 241347 241288 241346 241286 241345 241282 241344 241278 241342 Weight Shaft Keyseat Required ✝ Tapered Straight Bore BushTapered Straight Bore Bushing ing Bushing Bushing 3/8x3x16x6-7/16 3/8x3/16x2 2 5/16 x 5/32 x 6-7/16 1.8 5/16 x 5/32 x 6-7/16 5/16 x 5/32 x 2 1.8 .4 1/4 x 1/8 x6-7/16 1/4 x 1/8 x 2 2.0 .6 1/4 x 1/8 x 6-7/16 1/4 x 1/8 x 2 2.2 .6 1/4 x 1/8 x 6-7/16 1/4 x 1/8 x 1-3/4 2.2 .6 1/4 x 1/8 x 6-7/16 1/4 x 1/8 x 1-3/4 2.5 1 ■ See page G2-201 for reducer part numbers and drill and tap dimensions. for Flange Mount TXT Reducers. Now available only as special factory order. ● Taper Bushed Reducers require bushing for all bore sizes. ♥ Use with Taper Bushed Redudcer only.See page G2-203 for drill and tap information required to mount to reducer.

Stock Bore Size

♣ ✝ ▲ ◆
k

FEATURES/BENEFITS PAGE G2-3

NOMENCLATURE PAGE G2-11

SELECTION PAGE G2-13

RELATED PRODUCTS PAGE G2-152

G2-29

TIGEAR-2

MAXUM Concentric Reducer

1-7/16 (Max.) 1-3/8 1-5/16 ▲ 1-1/4 ▲ 1-3/16 ▲ 1-1/8 ▲ 1 ▲ Made to order. Shaft key furnished. Check the driven shaft and keyfor strength. Preferred bore. No bushing required for this bore size. Stock TXT1 Reducers are drilled for vertical mounting.

TORQUE-ARM

TORQUE-ARM II

Gearing Reference Guide

Gearing Reference Guide TORQUE-ARM II TORQUE-ARM MAXUM Concentric Reducer TIGEAR-2

SELECTION/DIMENSIONS
TORQUE-ARM Shaft Mount Speed Reducers
TXT105 - SINGLE REDUCTION TAPER BUSHED
7.06 4.50 1.97 3.75 9.943.27 3.25 1-7/16" MAX.
✼

7.13

1.26 END OF BRG. ON DRIVEN SHAFT

.38 BOLT 23.81 MIN. 29.63 MAX.

90f

1-1/8" DIA. SHAFT 1/4 X 1/8 X 2" K.S.

3.27 .94

2.67

2.50

✼ 1.25" MIN. DISTANCE FOR BUSHING SCREW REMOVAL

3.51 1.06

TXT105 - SINGLE REDUCTION STRAIGHT BORE
5.62 4.50 ✼

7.13 2.71 3.75 9.94 3.27 3.19

.56 END OF BRG. ON DRIVEN SHAFT 1-7/16" MAX.

.38 BOLT 23.81 MIN.29.63 MAX. 2.50

90f

1-1/8" DIA. SHAFT 1/4 X 1/8 X 2" K.S.

3.27 .94

2.67

2.81 1.06

FEATURES/BENEFITS PAGE G2-3

NOMENCLATURE PAGE G2-11

SELECTION PAGE G2-13

RELATED PRODUCTS PAGE G2-152

G2-30

SELECTION/DIMENSIONS
TORQUE-ARM Shaft Mount Speed Reducers
TXT105 Taper Bushed Reducers ■ k Reducer Part AGMA Actual Size Number Code Ratio TXT105T 241083 107S05 5.62...