Manual Ecfl 2000 (Flexografia)

[pic]










2000 ECLF

Exposure/Light-Finisher








PRE INSTALLATION
INSTALLATION
USER’S MANUAL
TECHNICAL MANUAL




MACHINE DESCRIPTION:
Manufacturer’s address: 3
Range of application: 3
Maximum capacity of the unit: 3
Principle description: 3

PRE-INSTALLATION:
Technical datas : 5
Crate dimension: 5
Floor space requirement: 6Connections Location : 6
Accessories needed for the connections: 6
Parts delivered with the machine : 7

INSTALLATION:
Unpacking: 8
Connections: 9
Prior to start exposing or light finishing plates: 11

USER'S MANUAL:
Initial Operation of the machine: 12
Main screen description: 13
Alarms: 16
Modify plate parameters: 17
Select the plate to process: 18
Startan Exposure cycle : 19
Start a Light-finisher cycle : 20

TECHNICAL MANUAL:
Password protected screens: 21
Lock access to plate parameters : 22
Machine setup : 23
Manual functions : 28
Hours counters : 29
Lamps replacement: 32
Gas spring and air cylinder replacement: 35
Lid movement adjustment: 36
Exchange the vacuum table temperature probe: 37
Exchange theexposure lamp temperature probe: 38
Air intake filter replacement: 39
Drain the water cooling circuit: 39
Spare part list: 40
Pneumatic scheme: 47
Electrical scheme: 48
CE CERTIFICATE: 58



Manufacturer’s address:
DEGRAF Srl
"Il Girasole" - Palazzo Donatello 8/03b
20084 Lacchiarella (MI)
Italy


Range of application:
This unit is a part of a full range dedicated forthe treatment of flexographic printing plates. This range includes Exposure, Thermal Processors, conventional solvent Processors, Dryer and Light Finisher.
The 2000 ECLF is a unit designed for the Exposing, Post-exposing and Light-Finishing of flexographic printing plates.


Maximum capacity of the unit:

|Capacity: |1 Exposure section|
| |1 Light finisher section |
|Maximum plate size: |47 x 60 inches |
| |1 200x 1 530 mm |



Principle description:• This unit is designed to Expose, Post-expose and Light-finish flexographic printing plates before and after the Thermal (or washout) process.
• The unit is operated by a touch screen which ensures very easy handling.
• In total 25 channels are available to memorize the Exposure, Post-exposure and Light-Finisher times.










Technical datas :

|Dimensions (w x l xh) : |2 620 x 1 820 x 1 100(closed) or 2 450(open) mm |
| |104 x 68 x 43 (closed) or 94(open) inches. |
|Net Weight : |1 000 Kg|
|Compressed air supply: |7 bars minimum |
| |16NL per cycle. |
|Exhaust : |1500 m3/h minimum for the LF|
|Temperature range : |17°C to 28°C |
| |63°F to 82°F |
|Humidity: |10% to 80% non condensing...