Manual Encore Enmab-8Cm
Páginas: 3 (623 palabras)
Publicado: 16 de noviembre de 2012
ENMAB-8CM
7.1 Channel USB Audio Box
User Manual
Features
USB specification 2.0 compliant USB audio device class spec. 1.0 and USB HID class spec. 1.1 compliant Full-duplex recording andplay-back 7.1 channel connector S/PDIF optical digital input and output 3.5mm jack connectors Support 48/44.1 KHz sampling rate for both playback and recording Dolby digital audio streaming via S/PDIF outDual microphone support
System Requirements
One available USB port Minimum Intel Pentium II 350 MHz or equivalent PC with 128MB RAM Amplified computer speakers or headphones Operating Systems: ® ®Windows 7 / XP / 2000 / Server 2003; Windows Vista DirectX 8.1 or above CD-ROM drive
® ®
Page 2
Package Contents
ENMAB-8CM USB Audio Box Type A to Type B USB Cable Software Driver CDUser Manual
Hardware Description
Figure 1. Buttons & Indicators
Volume Mute: Press button to mute, press again to unmute audio outputs. Microphone Mute: Press button to mute, press again tounmute microphone. Volume Down: Decreases volume. Page 3
Volume Up: Increases volume. Microphone Mute LED: LED is on when microphone is unmute. Power/Activity LED: The light will be on when theENMAB-8CM is on. The light will blink when activity is detected.
Figure 2. Connectors (Front View)
Headphones: Connects to the headphones. Line In: Connects to the TAPE/CD/DVD player or other audiosources for output mixing and/or recording. Front Speakers: Connects to the front speakers.
Page 4
Surround Speakers: Connects to the surround speakers while in 4/6/8 channel modes.Center/Bass Speakers: Connects to the Center/Bass speakers while in 6/8 channel modes. Back Speakers: Connects to back speakers while in 8 channel mode.
Figure 3. Connectors (Rear View)
S/PDIF IN:Connects to the digital output of an external audio device using an optical S/PDIF cable. S/PDIF OUT: Connects to the digital input of an external audio device using an optical S/PDIF cable. USB...
7.1 Channel USB Audio Box
User Manual
Features
USB specification 2.0 compliant USB audio device class spec. 1.0 and USB HID class spec. 1.1 compliant Full-duplex recording andplay-back 7.1 channel connector S/PDIF optical digital input and output 3.5mm jack connectors Support 48/44.1 KHz sampling rate for both playback and recording Dolby digital audio streaming via S/PDIF outDual microphone support
System Requirements
One available USB port Minimum Intel Pentium II 350 MHz or equivalent PC with 128MB RAM Amplified computer speakers or headphones Operating Systems: ® ®Windows 7 / XP / 2000 / Server 2003; Windows Vista DirectX 8.1 or above CD-ROM drive
® ®
Page 2
Package Contents
ENMAB-8CM USB Audio Box Type A to Type B USB Cable Software Driver CDUser Manual
Hardware Description
Figure 1. Buttons & Indicators
Volume Mute: Press button to mute, press again to unmute audio outputs. Microphone Mute: Press button to mute, press again tounmute microphone. Volume Down: Decreases volume. Page 3
Volume Up: Increases volume. Microphone Mute LED: LED is on when microphone is unmute. Power/Activity LED: The light will be on when theENMAB-8CM is on. The light will blink when activity is detected.
Figure 2. Connectors (Front View)
Headphones: Connects to the headphones. Line In: Connects to the TAPE/CD/DVD player or other audiosources for output mixing and/or recording. Front Speakers: Connects to the front speakers.
Page 4
Surround Speakers: Connects to the surround speakers while in 4/6/8 channel modes.Center/Bass Speakers: Connects to the Center/Bass speakers while in 6/8 channel modes. Back Speakers: Connects to back speakers while in 8 channel mode.
Figure 3. Connectors (Rear View)
S/PDIF IN:Connects to the digital output of an external audio device using an optical S/PDIF cable. S/PDIF OUT: Connects to the digital input of an external audio device using an optical S/PDIF cable. USB...
Leer documento completo
Regístrate para leer el documento completo.