Manual fanuc 0 mate

82003853 ' .

Series 0 -Model C Series 00 -Model G Series 0-Mate - Model G
Description Manual

GE Fanuc Automation
904 08 022 SHEFFIELD CNC THREADFORM GRINDER Model : 1004 SIN : 5-0931-1291

Series . 0 -.Model G Series 00 -Model C Series 0-Mate-Model G
Description Manual

GE Fanuc Automation
crz-61392Ei01

waxivnvG
The product described in this publication may employ hazardousvoltages or might create offer conditions that could, through misuse, inattention, or lack of understanding, result in personal injury, or damage to the product or to other equipment It is imperative, therefore, that personnel involved in the installation. maintenance, or use of this product understand the operation of the product and the contents of this publication.

This document is based oninformation available at the time of its publication. While efforts have been made to be accurate, the information contained herein does not purport to cover all details or variations in hardware ail software, nor to provide for every possible contingency in connection with installation, operation, and maintenance. Features may be described herein which are not present in all hardware and softwaresystems . GE Fanuc Automation assumes no obligation of notice to holders of this document with respect to changes subsequently made. GE Fanuc Automation makes no representation or warranty, expressed, implied, or statutory with inspect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of the information contained herein. No warranties of merchantability orfitness for purpose shall apply.

OCopyright 1989 GE Fanue Automation North America, Inc.

This manual describes the following products :

Name of products

Abbreviation

FANUC Series 0-TC FANUC Series 0-MC FANUC Series 0-TF FANUC Series 0-MF FANUC Series 0-TTC FANUC Series 00-TC FANUC Series 00-MC FANUC Series 0-Mate TC FANUC Series 0-Mate MC FANUC Series 0-Mate MF

0-TC 0-MC 0-TF0-MF 0-TTC 00-TC 00-MC 0-Mate TC 0-Mate MC 0-Mate MF Series 0-Mate Series 00 Series 0

CONTENTS

I.
1. 2. 2.1 2.2 2 .3 2.4

CNC FUNCTIONS
OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2-1 2-1 2-2 2-2 2-3

CONTROLLED AXES . . Controlled Axes . . . . Cf Axis Control . . . . . Cs AxisControl . . . . Axes Control by PMC

3.
4. 4.1 4.2 4 .3 4.4 4 .5 4.6 4.7 5.1 5.2 5.3 6.1 6.2

PREPARATORY FUNCTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....