Manual foo2zjs

foo2zjs-wrapper(1)

foo2zjs-wrapper(1)

NAME
foo2zjs-wrapper − Convert Postscript into a ZJS printer stream

SYNOPSIS
foo2zjs-wrapper [options] [ ps-file]

DESCRIPTION
foo2zjs-wrapper is a Foomatic compatible printer wrapper for the foo2zjs printer driver. This script reads a Postscript ps-file or standard input and converts it to Zenographics ZjStream printer format for driving theMinolta/QMS 2300 DL network color laser printer and other Zenographics-based printers. This script can be used in a standalone fashion, but is intended to be called from a printer spooler system which uses the Foomatic printer database.

COMMAND LINE OPTIONS
Normal Options These are the options used to select the parameters of a print job that are usually controlled on a per job basis. −c Print incolor (else monochrome). −C colormode Color correction mode [0]. 1 2 3 10 Photos (using m2300w CRDs) Photos and text (using m2300w CRDs) Graphics and text (using m2300w CRDs) ICM color profile (using -G *.icm file)

−d duplex Duplex code to send to printer [1]. 1 off 2 long edge 3 short edge −m media Media code to send to printer [1]. Media standard transparency envelope letterhead thick postcardlabels 2300DL 1 2 257 259 261 262 263 2200DL 1 2 na na 4 na 3

−p paper Paper size code to send to printer [1]. 1 5 7 20 28 37 letter legal executive env #10 env C5 env Monarch 9 11 13 27 34 A4 A5 B5 env DL env B5

−n copies Number of copies [1].

foo2zjs-wrapper 0.0

Thu Mar 25 08:12:19 2010

1

foo2zjs-wrapper(1)

foo2zjs-wrapper(1)

−r xresxyres Set device resolution inpixels/inch [1200x600]. −s source Source (Input Slot) code to send to printer [7]. 1 2 −t upper lower 4 7 manual auto

Draft mode. Every other pixel is white.

−2 −3 −4 −5 −6 −8 −9 −10 −12 −14 −15 −16 −18 Print in N-up. Requires the psutils package. −o orient Orientation used for N-up. Portrait Landscape Seascape -op -ol -os (normal) (rotated 90 degrees anticlockwise) (rotated 90 degrees clockwise)Printer Tweaking Options These are the options used to customize the operation of foo2zjs for a particular printer. −u xoff xyoff Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers. −l xoff xyoff Set the offset of the end of theprintable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers. −L mask Send the logical clipping values from -u/-l in the ZjStream. foo2zjs-wrapper always runs Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer hasunprintable regions. This option is used to move the position of the clipped image back to where it belongs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in most cases. 0 1 2 3 −P don’t send any logical clipping amounts only send Y clipping amount only send X clipping amount send both X and Y clipping amounts

Do not send START_PLANE codes onmonochrome output. May be needed by some monochrome-only printers, such as the HP LaserJet 1000.

−X padlen Add extra zero padding to the end of BID segments. The default is 16 bytes. Padding 16 bytes of zeroes is needed for older ZjStream printers, such as the Minolta 2200DL and HP LaserJet 1000, and seems harmless to newer ones, such as the Minolta 2300DL. So the default should be good for allcases. −z model Model: 0=2300DL, 1=HP1020. Default is 0. Color Tweaking Options These are the options used to control the quality of color output. Color correction is currently a WORK IN PROGRESS.

foo2zjs-wrapper 0.0

Thu Mar 25 08:12:19 2010

2

foo2zjs-wrapper(1)

foo2zjs-wrapper(1)

−g gsopts Additional options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc. This...