Manual Line Extender Motorola

Installation and Operation Manual BLE100
1GHz Broadband Line Extender

4

2

6

AS

M BL SE

ED

IN

MEXIC

5

O

1

3

Caution
These servicing instructions are for use by qualified personnel only. To reduce the risk of electrical shock, do not perform any servicing other than that contained in the Installation and Troubleshooting Instructions unlessyou are qualified to do so. Refer all servicing to qualified service personnel.

Special Symbols That Might Appear on the Equipment
This symbol indicates that dangerous voltage levels are present within the equipment. These voltages are not insulated and may be of sufficient strength to cause serious bodily injury when touched. The symbol may also appear on schematics.

Theexclamation point, within an equilateral triangle, is intended to alert the user to the presence of important installation, servicing, and operating instructions in the documents accompanying the equipment.

For continued protection against fire, replace all fuses only with fuses having the same electrical ratings marked at the location of the fuse.

FCC Compliance
Thisequipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the Installation Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Any changes or modifications not expressly approved by Motorola could void the user’s authority to operatethis equipment under the rules and regulations of the FCC.

Canadian Compliance
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respects toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Declaration of Conformity We Motorola, Inc. 101 Tournament DriveHorsham, PA 19044, U.S.A.

declare under our sole responsibility that the STARLINE® Model BLE100

to which this declaration relates is in conformity with one or more of the following standards: EMC Standards EN55022 Safety Standards EN60065 EN60825 EN60950 IEC 60950 + A1: 1992 + A2: 1993 + A3: 1995 + A4: 1996 EN55024 EN50083-2 CISPR-22 CISPR-24

following the provisions of theDirective(s) of the Council of the European Union: EMC Directive 89/336/EEC Low Voltage Directive 73/23/EEC

Copyright © 2006 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Motorola, Inc.Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particularpurpose. Motorola may make improvements or changes in the product(s) described in this manual at any time.

MOTOROLA, Intelligence Everywhere and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006

Contents
Section 1

Introduction
Using This Manual...