Manual MB 2610 triple bean balance

User and Service Manual Model MB-2610 Triple Beam Pan Balance
CONSTRUCTION AND APPLICATION: MB-2610 Single – Pan Balance is an unequal arm type with three beams. Each beam is made of a highquality aluminum alloy and the plane is of ground agate, which improves accuracy of use and lengthens life of operation. The product can use attachment weights to extend the weighing range. To speedweighing, the magnetic damping system brings the pointer to rest with a minimum number of swings.
The MB-2610 is suitable for physics and chemistry experiments, analytical weighing in chemical works,medical and hygiene weighing, foodstuff, agriculture, textiles, electronics, mines, scientific research institutions, high school science labs, universities and colleges and more.
SPECIFICATIONS:Capacity Without attachment weights: 610 g. With attachment weights: 2610 g. Readability: 0.1 g. Weighing units: grams Beam Calibrations: 10 x 0.1 g; 100 x 10 g; 500 x 100 g
FEATURES: Triple Beam, DirectReading Magnetic Damping System
ADJUSTMENT AND OPERATION: Unpacking:
Carefully remove the balance and the separate sliding weights from the foam carton. Removed slit rubber washers locatedunderneath the platform and rubber washer located above the pointer. Set-Up: After placing the balance on a smooth, flat surface, slide the weights up into the slot on the respective beam (center and behind).With all sliding weights in zero position, the pointer should be near zero.
Zeroing: For exact zero, adjust the knurled knob, which is located at the left end of the beam. It is advisable to checkthe zero adjustment periodically.
Attachment Weights: Total capacity is 2610 grams when attachment weights are suspended from the pivots, without the weights, the capacity is only 610 grams.CONSTRUCCIÓN Y APLICACIÓN: MB-2610 Individual - Pan Balance es un tipo de brazo desigual con tres vigas. Cada viga está hecha de una aleación de aluminio de alta calidad y el plano es de ágata suelo, lo...