Manual para arregla tv daewoo 29stq 29s4

 Caution

: In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information,please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr).

2 4 5 6
6 8

11 12 13
SERVISE PARTS LIST
22

14

1 7

1

2

3

4

5
coupler

ALIGNMENT INSTRUCTIONS

S7PTRN NORMAL

6

Table-B
MODE S2 ADJUSTMENT Screen Adjustment Auto RF AGC Video Level (VIDEOL) RF AGC Delay (RFAGCD) FM Level (FM.LEV) AGC Point A/D VALUE H-PHASE H-SIZE P-CUSHION V-POSI V-SIZE V-LIN V-S TILT TOP-C BOT-C V-SIZE-C NO SD POWER OFF ABL-POINT BK-LEVEL BK-START BRI-STOP Y-CORING PRE-SHOOT DC-REST W.PEAK FIESH OSD-GAIN OSD-GRAY OSD-SW HT-SW HT-LEVEL C-BPF C-KILL RB-ANGLE G-ANGLEC-EXT FILTER TRAP-TEST CORING-GN H-SIZE-CP Red Drive (RD) Green Drive (GD) Blue Drive (BD) Red Bias (RB) Green Bias (GB) Blue Bias (BB) SCR R-BIAS SCR G-BIAS SCR B-BIAS SCR R-DRIVE SCR G-DRIVE SCR B-DRIVE SCR BRIGHT SUB BRIGHT CONTRAST TINT COLOR SHARPNESS FM/AM PRE SCART PRE MONI. VOL Internal Black Internal 100% White Internal 60% White Internal Cross Pattern Forwarding Mode DATA INITIAL RANGEREMARKS

S5

7 30 20 3.75 10 43 32 29 110 13 12 37 8 8 7 YES 0 0 3 0 0 3 3 1 0 0 0 0 0 0 0 1 15 0 0 1 0 3 4 15

0~7 0~63 0~31

Must be set to 7 Align RF AGC threshold Must be set to 20 Select AGC reference voltage Align sync flyback pulse, using internal cross pattern(S7)

S6

0~31 0~127 0~63 0~63 0~127 0~31 0~31 0~63 0~15 0~15 0~7

Align Vertical DC bias, using internal crosspattern(S7) Align Vertical amplitude, using internal cross pattern(S7) Must be set to 16

Automatically turn off in 15min for no received signal.

S7-1

S7-2

S8

127 0 127 0 64 10 64 110 90 27 35 27 7 33 33 60

S8-2

S9

0~127 0~15 0~127 0~255 0~255 0~255 0~255 0~255 0~255 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127 0~127

Align RED OUT AC level Must be set to 10Align BLUE OUT AC level Align RED OUT DC level Align GREEN OUT DC level Align BLUE OUT DC level

S11 S12

Display Internal Black Pattern Display Internal 100% White Display Internal 60% White Display Internal Cross Pattern Factory Initialization

7

NOTE

8

9

0 127 0 64 10 64 110

35 27

10

11

12

PRINTED CIRCUIT BOARD

13

i CAUTION : In this Service Manual,some parts can be changed for improving their
performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List)in Service information Center(http://svc.dwe.co.kr)
ZZ100 ZZ110 00020 M821 ZZ120 M211 M781 ZZ130 10 M801 M811 M822 ZZ131 ZZ132 ZZ140 M201A M201B M211A M541 SP01A SP02A V901 ZZ200 M191 M191A M201 M201A M561 ZZ210 P601A SP01SP02 ZZ290 10 30 40 C307 C408 C409 C410 C423 C430 C803 C804 C809 48B4343A01 PTACPWJ882 48586054K1 4858213800 PTBCSHJ882 4852159400 4857817630 PTPKCPJ882 6520010100 4858059200 4858197000 4858215100 58G0000143 48519A6210 PTCACAJ882 4856215402 4856015830 7172401612 4855415800 7178301011 7178301011 4859633760 PTFMSJJ882 4851943200 7178301011 4852077600 4857817610 4855617400 PTSPPWJ882 4850704S274858305220 4858305220 PTMPMSJ882 2193102005 2291050616 2291050301 CEYF1E332V CMYH3C912J CMYH3C822J CMYE2G273J CMYE2G514J CEYD1H689W CL1UC3104M CEYN2D331P CH1BFE222M TRANSMITTER REMOCON ACCESSORY AS MANUAL INSTRUCTION BAG INSTRUCTION COVER BACK AS COVER BACK CLOTH BLACK PACKING AS STAPLE PIN BOX CARTON PAD BAG P.E COIL DEGAUSSING CRT GROUND AS CABINET AS WASHER RUBBER SCREW CRT FIX SCREW TAPPTITE SPECPLATE SCREW TAPPTITE SCREW TAPPTITE CRT MASK FRONT AS BUTTON CTRL SCREW TAPPTITE MASK FRONT CLOTH BLACK MARK BRAND SPEAKER AS CONNECTOR SPEAKER SPEAKER PCB MAIN MANUAL AS SOLDER BAR FLUX SOLDER FLUX SOLVENT C ELECTRO C MYLAR C MYLAR C MYLAR C MYLAR C ELECTRO C LINE ACROSS C ELECTRO C CERA AC R-43A01 (AA) DTQ-29S4FC DTM-2082CW L.D.P.E T0.05X250X400 DTQ-29S4FC FR HIPS BK FELT 400X20X0.7 DTQ-29S4FC...