Manual transmisor m1tex1000lcd11en

TEX1000-LCD
ELETTRONICA

User Manual
Volume 1

Manufactured by

Italy

File name: Version: Date:

TEX1000_en.P65 1.1 23/06/2005

Revision History
Date Version 09/09/03 1.0 23/06/05 1.1 Reason First Version Telemetry option upgrade Editor G. De Donno J. Berti

TEX1000-LCD - User Manual Version 1.1 © Copyright 2003-2005 R.V.R. Elettronica SpA Via del Fonditore 2/2c - 40138 -Bologna (Italia) Telefono: +39 051 6010506 Fax: +39 051 6011104 Email: info@rvr.it Web: www.rvr.it All rights reserved Printed and bound in Italy. No part of this manual may be reproduced, memorized or transmitted in any form or by any means, electronic or mechanic, including photocopying, recording or by any information storage and retrieval system, without written permission of the copyright owner.Notification of intended purpose and limitations of product use This product is a FM transmitter intended for FM audio broadcasting. It utilises operating frequencies not harmonised in the intended countries of use. The user must obtain a license before using the product in intended country of use. Ensure respective country licensing requirements are complied with. Limitations of use canapply in respect of operating freuency, transmitter power and/or channel spacing. Declaration of Conformity Hereby, R.V.R. Elettronica SpA, declares that this FM transmitter is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

TEX1000-LCD

Table of Contents
1. 2. 3. 3.1 3.2 4. 5. 5.1 5.2 5.3 5.4 5.5 6 6.1 6.2 6.3 7. 7.1 7.2 8. 8.1 8.2 8.3 8.48.5 8.6 8.7 8.8 8.9 8.10 9. 9.1 9.2 10. 10.1 10.2 10.3 10.4 Preliminary Instructions Warranty First Aid Treatment of electrical shocks Treatment of electrical Burns General Description Quick guide for installation and use Preparation Use Settings and calibration Software Optional Functions External Description Front Panel Rear Pannel Connectors description Technical specifications Physicalspecifications Electrical specifications Working Principles Power Supply Panel board - CPU Modem interface and battery-charger (Opz. /TLM) 16-bit cpu card (Opz. /TLM) Telemetry board Main board Driver card Power amplifier LPF card BIAS card Identification of the Modules Upper view Bottom view Telemetry (Opt.) Telemetry description SIM card installation Alarms Telesignalling configuration Remote Control1 1 1 1 2 3 5 5 6 6 7 13 16 16 17 19 21 21 21 23 23 24 24 25 25 25 26 26 26 27 28 28 29 30 30 31 32 36

User Manual

Rev. 1.1 - 23/06/05

i

TEX1000-LCD
11. 11.1 11.2 11.3 System Status Enquiries Local enquiries Remote enquiries with remote control software (Opt.) Remote enquiries with GSM modem + SMS 37 37 37 37

ii

Rev. 1.1 - 23/06/05

User Manual

TEX1000-LCD
1.Preliminary Instructions
To claim your rights under this warranty, you shold follow this procedure: 1 Contact the dealer or distributor where you purchased the unit. Describe the problem and, so that a possible easy solution can be detected.
This manual is written as a general guide for those having previous knowledge and experience with this kind of equipment, well conscious of the risks connected withthe operation of electrical equipment.

It is not intended to contain a complete statement of all safety rules which should be observed by personnel in using this or other electronic equipment. The installation, use and maintenance of this piece of equipment involve risks both for the personnel performing them and for the device itself, that shall be used only by trained personnel. R.V.R.Elettronica SpA doesn’t assume responsibility for injury or damage resulting from improper procedures or practices by untrained/unqualified personnel in the handling of this unit. Please observe all local codes and fire protection standards in the operations of this unit. WARNING: always disconnect power before opening covers or removing any part of this unit. Please observe all local codes and fire...