Manual

INSTRUCTIONS of The Receiver
1：FUN 2：ESC 3：ENT
1 2 3 4 5 6 4：DOWN 5：MOVE 6：UP
Methods of operation
I.Initialization method
●Initialization method aims to clear the residual data of the receiver, if we do not initialize receiver otherwise it may affect the normal use.
1. Connected with Power, thereceiver automatically self-test, accompanied by music, the screen appears 99, 88... 33... 00, and so on, the last, on the right cover of the screen, a circle point appears, said state into thework-on.
2. Press the Select key (FUN) for 3 seconds and the screen appears F1.
3. use the up key (UP)to choose F6
4. press the enter key (ENT)once, if the screen appears [00],that means that it has beeninitialized before taking it; push the escape key (ESC), appearing [F6], and push the escape key (ESC) again to enter into the task state.
If the screen appears [01], keep pressing the enter key(ENT) until there are anything appeared on the screen, after a while, the screen appears [00], that means that initialization is finished, Press the escape key (ESC)and appear[F6], Press the escape key(ESC) again to enter into the task state.

II. Enrolling number
1. Under the task state, Press the Select key(FUN)for 3 seconds, the screen appears [F1]
2. Press the enter key(ENT), appearing[01]
3. Use the up key (up), the left and right key (MOVE), the down key (DOWN) to choose the number need to be enrolled.
4. Press once the pager to be registered accompanied with music, the number onthe screen flashes and then stops.
5. Press the escape key (ESC), appearing [F1]
6. Press the escape key (ESC) again to enter into the task state to finish the enrolling.
7. Need to enroll manynumbers, repeat step 3 and 4, and at the last press the escape key (ESC) twice and finish the enrolling at the same time.


Ⅲ. Choose the sound sort
1. Press the Select key (FUN) for 3 seconds in...