Maquina De Anestecia

Aestiva Anesthesia Machine
Technical Reference Manual
Aestiva
09/06 1006-0452-000
Datex-Ohmeda products have unit serial numbers with coded logic which indicates a
product group code, the year of manufacture, and a sequential unit number for
identification. The serial number can be in one of two formats.
Aestiva
,
SmartVent
,
and
Link-25
are registered trademarks of Datex-Ohmeda Inc.Other brand names or product names used in this manual are trademarks or registered
trademarks of their respective holders.
AAA
X
11111 AAA
XX
111111AA
The
X
represents an alpha character
indicating the year the product was
manufactured;
H
= 2004,
J
= 2005, etc.
I
and
O
are not used.
The
XX
represents a number indicating
the year the product was manufactured;
04
= 2004,05
= 2005, etc.
Technical Reference Manual
1006-0452-000 09/06
i
This document is not to be reproduced in any manner, nor are the contents to be
disclosed to anyone, without the express authorization of the product service
department, Datex-Ohmeda, Ohmeda Drive, PO Box 7550, Madison, Wisconsin,
53707.
© 2006 Datex-Ohmeda Inc.
Aestiva Anesthesia Machine
Aestiva
ii
09/06 1006-0452-000Important
The information contained in this Technical Reference manual pertains only to those
models of products which are marketed by Datex-Ohmeda as of the effective date of
this manual or the latest revision thereof. This Technical Reference manual was
prepared for exclusive use by Datex-Ohmeda service personnel in light of their training
and experience as well as the availability to themof parts, proper tools and test
equipment. Consequently, Datex-Ohmeda provides this Technical Reference manual to
its customers purely as a business convenience and for the customer's general
information only without warranty of the results with respect to any application of such
information. Furthermore, because of the wide variety of circumstances under which
maintenance and repairactivities may be performed and the unique nature of each
individual's own experience, capacity, and qualifications, the fact that customer has
received such information from Datex-Ohmeda does not imply in anyway that Datex-
Ohmeda deems said individual to be qualified to perform any such maintenance or
repair service. Moreover, it should not be assumed that every acceptable test and
safetyprocedure or method, precaution, tool, equipment or device is referred to within,
or that abnormal or unusual circumstances, may not warrant or suggest different or
additional procedures or requirements.
This manual is subject to periodic review, update and revision. Customers are
cautioned to obtain and consult the latest revision before undertaking any service of
the equipment. Comments andsuggestions on this manual are invited from our
customers. Send your comments and suggestions to the Manager of Technical
Communications, Datex-Ohmeda, Ohmeda Drive, PO Box 7550, Madison, Wisconsin
53707.
w
CAUTION
Servicing of this product in accordance with this
Technical Reference
manual
should never be undertaken in the absence of proper tools, test equipment and
the most recent revision tothis service manual which is clearly and thoroughly
understood.
Technical Competence
The procedures described in this Technical Reference manual should be performed by
trained and authorized personnel only. Maintenance should only be undertaken by
competent individuals who have a general knowledge of and experience with devices of
this nature. No repairs should ever be undertaken orattempted by anyone not having
such qualifications.
Datex-Ohmeda strongly recommends using only genuine replacement parts,
manufactured or sold by Datex-Ohmeda for all repair parts replacements.
Read completely through each step in every procedure before starting the procedure;
any exceptions may result in a failure to properly and safely complete the attempted
procedure.
1006-0452-000 09/06 iii...