Maquinas con variador

Sizes 1 & 2 UL Type 1 Conduit Connection Boxes for Unidrive SP, Affinity, Commander SK/HSK and Commander GP20
1
Figure 1

Conduit connection box installation
Typical installations for sizes 1 &2 conduit connection boxes
1 2

3

4

NOTE

In stage 2 of the installation, the conduit connection box must be bolted to the drive heatsink to create a good ground connection.

Weight Drive(Size 1 execept 1405/1406) 5kg (11.0lb) (1405/1406) (Size 2) Conduit box Size 1 Size 2 5.8kg (12.8lb) 7kg (15.4lb) 0.8kg (1.8lb) 1.0kg (2.2lb)

0471-0135-01

Figure 2

Dimensions of size 1drive with conduit connection box fitted
219.0mm (8.614in) 100.0mm (3.937in) 40.0±5.0mm (1.5750.196in) ±

452.0mm (17.776in)

473.0mm (18.612in)

370.0±1.0mm ± (14.5670.039in)

87.0±1.0mm(3.4250.039in) ±

Suggested position for caution label 66.0±1.0mm ± (2.5980.039in)

Knockout (∅22.0) (0.87in)

66.0 (2.60in)

∅6.0 (0.24in)

∅22.0 (0.87in) 94.0 (3.70in) 142.3 (5.6in) 106.3(4.18in) Mounting holes

27.5 (1.06in) 53.5 (2.09in)

Bottom view

178.3 (7.02in)

0471-0135-01

Figure 3

Dimensions of size 2 drive with conduit connection box fitted
219.0mm (8.626in)155.0mm (6.098in)

452.0mm (17.797in)

442.0mm (17.404in)

337.5±1.0mm ± (13.2870.039in)

81.0±1.0mm (3.1890.039in) ±

Suggested position for caution label

121.0±1.0mm ± (4.7640.039in)∅28.0 (1.10in) Knockout ∅22.0 (0.87in)

121.0 (4.76in)

∅6.0 (0.24in)

200.3 (7.87in)

179.3 (7.05in)

78.5 (3.07in) 81.5 (3.19in) 119.5 (4.69in) 122.5 (4.80in)

109.3 (4.29in)

38.5 (1.50in)147.3 (5.79in)

Bottom view

Mounting holes

2

Instructions for complying to UL Type 1

Size 1 & 2 Affinity drives conform to UL type 1 as standard without the need for conduitconnection boxes to be installed. If the Affinity drive is surface or wall mounted, then a bottom conduit connection box is required for power and control cable connections. The other surface or wall...