Matematicas

Operating Instructions Edition 12/2007

Pressure transmitter SITRANS P, DS III series with HART communication

sitrans

Introduction General safety notes

1 2 3 4 5 6 7 8 9 10 11 12 13 A B

SITRANS Pressure transmitter SITRANS P, DS III series with HART communication
Operating Instructions

Description Install Connecting Operation Operating functions through HART Functionalsafety Commissioning Service and maintenance Technical data Dimension drawings Spare parts/accessories Appendix

7MF4*33

List of abbreviations

12/2007

A5E00047092-06

Safety Guidelines
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlightedin the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken.CAUTION with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken. CAUTION without a safety alert symbol, indicates that property damage can result if proper precautions are not taken. NOTICE indicates that an unintended result or situation can occur if the corresponding information is not taken into account. If more than one degree of dangeris present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.

Qualified Personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning and operation of a device/system may only be performed byqualified personnel. Within the context of the safety notes in this documentation qualified persons are defined as persons who are authorized to commission, ground and label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage
Note the following: WARNING This device may only be used for the applications described in the catalog or thetechnical description and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as well as careful operation and maintenance.

Trademarks
All names identified by ® are registered trademarks of the Siemens AG. Theremaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information inthis publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG Automation and Drives Postfach 48 48 90327 NÜRNBERG GERMANY

Ordernumber: A5E00047092 Ⓟ 03/2008

Copyright © Siemens AG 2007. Technical data subject to change

Table of contents
1Introduction................................................................................................................................................ 9 1.1 1.2 1.3 1.4 2 2.1 2.2 2.3 2.4 2.5 3 3.1 3.2 3.3 3.4 3.5 3.5.1 3.5.2 3.5.3 3.5.3.1 3.5.3.2 3.5.3.3 3.5.3.4 3.5.3.5 3.5.3.6 3.5.3.7 3.6 3.7 4 4.1 4.2 4.2.1 4.2.2 4.2.3 4.3 Objective of this documentation.....................................................................................................9 History...