Mattematicas
Páginas: 2 (316 palabras)
Publicado: 2 de mayo de 2012
Print Date: Tue Sep 06 18:08:22 VET 2011
MODEL 550 MAINTENANCE MANUAL (Rev 30) 5-12-19 (Rev 29)
INSPECTION PHASE 19
Date: Registration Number: Serial Number: Total Time: ______________________________ _______________ _______________
1.
Description A. B. Phase 19 consists of items to be inspected at the first 10,000 hours and every 2500 hours thereafter. Inspection items are listedin order of the zone in which the inspection is to be performed. A descriptive statement of the inspection requirement and the Item Code Number for cross reference to section 5-10-01 is provided. Inmany instances, tasks define more specifically the scope and extent of each required inspection. These tasks are printed in the individual chapters of this manual. The right portion of each pageprovides room for the mechanic's and inspector's initials and remarks. These pages may be reproduced as a checklist for use when performing this inspection phase. During accomplishment of each of thespecific inspection tasks within this phase, additional general inspections of the surrounding areas should be performed while access is available. These general inspections are intended to detect obviousconditions which may warrant further action. If a component or system is disturbed (due to maintenance being performed) after completion of an initially required task, then that specific task must bereconfirmed after completion of any maintenance before returning the system or component to service.
ZONE MECH INSP REMARKS
C. 2.
General Inspection Criteria A.
B.
ITEM CODE TASK NUMBERA553002
Vertical Stabilizer Aft Spar Inspection - Complete Task 340 55-30-01-251
A553003
Vertical Stabilizer Forward Spar Cap Strap Inspection - 340 Complete Task 55-30-01-250
A553007Vertical Stabilizer Aft Spar Flange - Inspect. Task 55-30- 340 01-252
*** End of Phase 19 Inspection Items ***
© 2011 Cessna Aircraft Company
Retain printed data for historical reference only....
MODEL 550 MAINTENANCE MANUAL (Rev 30) 5-12-19 (Rev 29)
INSPECTION PHASE 19
Date: Registration Number: Serial Number: Total Time: ______________________________ _______________ _______________
1.
Description A. B. Phase 19 consists of items to be inspected at the first 10,000 hours and every 2500 hours thereafter. Inspection items are listedin order of the zone in which the inspection is to be performed. A descriptive statement of the inspection requirement and the Item Code Number for cross reference to section 5-10-01 is provided. Inmany instances, tasks define more specifically the scope and extent of each required inspection. These tasks are printed in the individual chapters of this manual. The right portion of each pageprovides room for the mechanic's and inspector's initials and remarks. These pages may be reproduced as a checklist for use when performing this inspection phase. During accomplishment of each of thespecific inspection tasks within this phase, additional general inspections of the surrounding areas should be performed while access is available. These general inspections are intended to detect obviousconditions which may warrant further action. If a component or system is disturbed (due to maintenance being performed) after completion of an initially required task, then that specific task must bereconfirmed after completion of any maintenance before returning the system or component to service.
ZONE MECH INSP REMARKS
C. 2.
General Inspection Criteria A.
B.
ITEM CODE TASK NUMBERA553002
Vertical Stabilizer Aft Spar Inspection - Complete Task 340 55-30-01-251
A553003
Vertical Stabilizer Forward Spar Cap Strap Inspection - 340 Complete Task 55-30-01-250
A553007Vertical Stabilizer Aft Spar Flange - Inspect. Task 55-30- 340 01-252
*** End of Phase 19 Inspection Items ***
© 2011 Cessna Aircraft Company
Retain printed data for historical reference only....
Leer documento completo
Regístrate para leer el documento completo.