Msds Spitfire

Material Safety Data Sheet
According to 91/155 EEC
Reviewed on 8.03.2006

1. Identification of the product and of the company/undertaking
Identification of the product : SPITFIRE MILD SOLVENT CLEANING FLUID Company/undertaking identification : Company name: MUTOH EUROPE NV. Address: Archimedesstraat 13 8400 Oostende Belgium Phone: +32.59.561.400 Fax: +32.59.807.117 Contact Person: E. Baert2. Composition/information on ingredients
Chemical characterization Description: Mixture of substances listed below with nonhazardous additions. Dangerous components: CAS: 112-07-2 2-butoxyethyl acetate EINECS: 203-933-3 CAS: 108-65-6 2-methoxy-1-methylethyl acetate EINECS: 203-603-9 CAS: 108-94-1 cyclohexanone EINECS: 203-631-1

Xn; R 20/21 Xi; R 10-36 Xn; R 10-20

80-100% 2.5-10% 2.5-10%Additional information: For the wording of the listed risk phrases refer to section 16.

3. Hazards identification
Hazard description: Xn Harmful

Information concerning particular hazards for human and environment: The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version. R 20/21Harmful by inhalation and in contact with skin. Classification system: The classification is according to the latest editions of the EU-lists, and extended by company and literature data.

4. First-aid measures
General information: Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. After inhalation: Supply fresh air. Ifrequired, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation. After skin contact: Generally the product does not irritate the skin. After eye contact: Rinse opened eye for several minutes under running water. After swallowing: Seek medical advice or consult doctor.

Page 1/5Material Safety Data Sheet
According to 91/155 EEC
Reviewed on 8.03.2006

5. Fire-fighting measures
Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Protective equipment: Mouth respiratory protective device.

6. Accidental release measures
Person-related safety precautions: Not required. Measures for environmentalprotection: Do not allow to enter sewers/ surface or ground water. Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.

7. Handling and storage
Handling Information for safe handling: Ensure good ventilation/exhaustion at theworkplace. Information about fire - and explosion protection: No special measures required. Storage Requirements to be met by storerooms and receptacles: No special requirements. Information about storage in one common storage facility: Not required. Further information about storage conditions: Keep container tightly sealed.

8. Exposure controls/personal protection
Additional information aboutdesign of technical facilities: No further data; see item 7. Ingredients with limit values that require monitoring at the workplace: 108-65-6 2-methoxy-1-methylethyl acetate OES Short-term value: 548 mg/m³, 100 ppm Long-term value: 274 mg/m³, 50 ppm New, IOELV, Sk 108-94-1 cyclohexanone OES Short-term value: 20 ppm Long-term value: 10 ppm New, IOELV, Sk Additional information: The lists valid duringthe making were used as basis. Personal protective equipment: General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin. Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained...