Msp430g2553

MSP430G2x53
MSP430G2x13
www.ti.com

SLAS735G – APRIL 2011 – REVISED AUGUST 2012

MIXED SIGNAL MICROCONTROLLER
FEATURES

1

•
•

•
•
•
•

•
•

Low Supply-Voltage Range: 1.8 V to 3.6 V
Ultra-Low Power Consumption
– Active Mode: 230 µA at 1 MHz, 2.2 V
– Standby Mode: 0.5 µA
– Off Mode (RAM Retention): 0.1 µA
Five Power-Saving Modes
Ultra-Fast Wake-Up From Standby Mode inLess Than 1 µs
16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
Basic Clock Module Configurations
– Internal Frequencies up to 16 MHz With
Four Calibrated Frequency
– Internal Very-Low-Power Low-Frequency
(LF) Oscillator
– 32-kHz Crystal
– External Digital Clock Source
Two 16-Bit Timer_A With Three
Capture/Compare Registers
Up to 24 Touch-Sense-Enabled I/O Pins

•

•

••
•

•
•
•

•

Universal Serial Communication Interface
(USCI)
– Enhanced UART Supporting Auto Baudrate
Detection (LIN)
– IrDA Encoder and Decoder
– Synchronous SPI
– I2C™
On-Chip Comparator for Analog Signal
Compare Function or Slope Analog-to-Digital
(A/D) Conversion
10-Bit 200-ksps Analog-to-Digital (A/D)
Converter With Internal Reference, Sampleand-Hold, and Autoscan(See Table 1)
Brownout Detector
Serial Onboard Programming,
No External Programming Voltage Needed,
Programmable Code Protection by Security
Fuse
On-Chip Emulation Logic With Spy-Bi-Wire
Interface
Family Members are Summarized in Table 1
Package Options
– TSSOP: 20 Pin, 28 Pin
– PDIP: 20 Pin
– QFN: 32 Pin
For Complete Module Descriptions, See the
MSP430x2xx Family User’s Guide (SLAU144)DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes, is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers,and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16bit timers, up to 24 I/O touch-sense-enabled pins, a versatile analog comparator, and built-in communicationcapability using the universal serial communication interface. In addition the MSP430G2x53 family members
have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values,
and then process the data for display or for transmission to a host system.

1

Please beaware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processingdoes not
necessarily include testing of all parameters.

Copyright © 2011–2012, Texas Instruments Incorporated

MSP430G2x53
MSP430G2x13
SLAS735G – APRIL 2011 – REVISED AUGUST 2012

www.ti.com

Table 1. Available Options (1) (2)
Device

BSL

EEM

Flash
(KB)

RAM
(B)

Timer_A

COMP_A+
Channel

ADC10
Channel

USCI_A0,
USCI_B0

Clock

1

LF,
DCO,
VLOMSP430G2553IRHB32
MSP430G2553IPW28
MSP430G2553IPW20

I/O

Package
Type

24
1

1

16

512

2x TA3

8

8

32-QFN

24

28-TSSOP

16

20-TSSOP

MSP430G2553IN20

16

20-PDIP

MSP430G2453IRHB32

24

32-QFN

24

28-TSSOP

MSP430G2453IPW28
MSP430G2453IPW20

1

1

8

512

2x TA3

8

8

1

LF,
DCO,
VLO

16

20-TSSOP

MSP430G2453IN20...