Nadapara

Advant® OCS
with Master software

MultiVendor Interface MODBUS® with MS and
CI532V02
Advant® Controller 400 Series
User’s Guide

Use of DANGER, WARNING, CAUTION, and NOTE
This publication includes, DANGER, WARNING, CAUTION, and NOTE information where appropriate to point out safety
related or other important information.
DANGER

Hazards which could result in severe personal injury ordeath

WARNING

Hazards which could result in personal injury

CAUTION

Hazards which could result in equipment or property damage

NOTE

Alerts user to pertinent facts and conditions

Although DANGER and WARNING hazards are related to personal injury, and CAUTION hazards are associated with
equipment or property damage, it should be understood that operation of damaged equipment could, undercertain operational
conditions, result in degraded process performance leading to personal injury or death. Therefore, comply fully with all
DANGER, WARNING, and CAUTION notices.

TRADEMARKS
Advant is a registered trademark of ABB Asea Brown Boveri Ltd. Switzerland
Master, MasterBus MasterNet and MasterPiece are registered trademarks of ABB Asea Brown Boveri Ltd. Schweiz.
MODBUS is a registeredtrademark of Gould Electronics
Standard Radio is a trademark of Standard Radio Telecom AB, Sweden
Westermo is a trademark of Westermo Teleindustri AB, Sweden

NOTICE
The information in this document is subject to change without notice and should not be construed as a commitment by ABB
Industrial Systems AB. ABB Industrial Systems AB assumes no responsibility for any errors that may appearin this document.
In no event shall ABB Industrial Systems AB be liable for direct, indirect, special, incidental or consequential damages of any
nature or kind arising from the use of this document, nor shall ABB Industrial Systems AB be liable for incidental or
consequential damages arising from use of any software or hardware described in this document.
This document and parts thereof mustnot be reproduced or copied without ABB Industrial Systems AB’s written permission,
and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.
The software described in this document is furnished under a license and may be used, copied, or disclosed only in accordance
with the terms of such license.

CE MARKING
This product meets therequirements specified in EMC Directive 89/336/EEC and in Low Voltage Directive 72/23/EEC.

Copyright © ABB Industrial Systems AB 1997

3BSE 000 533R0001 Rev A

3BSE001264/D

Template: 3BSE001286/E

MultiVendor Interface - MODBUS® with MS and CI532V02
Table of Contents

TABLE OF CONTENTS
Chapter 1 - Introduction
1.1

GeneralInformation................................................................................................. 1-1

1.2

Equipment Requirements......................................................................................... 1-1

1.3

Manual Organization ............................................................................................... 1-3

1.4

Conventions............................................................................................................. 1-4

1.5

Related Documentation............................................................................................ 1-5

1.6

Release History ........................................................................................................ 1-5

1.7Terminology............................................................................................................. 1-6

1.8

Product Overview .................................................................................................... 1-7
1.8.1

Functionality ........................................................................................... 1-9

1.8.2

Functional Overview............................................................................. 1-10

1.8.3

Initiating a...