Network camera user

Network Camera
User Guide

Contents
Chapter I

Product Introduction--

Chapter II

Product Installation --

Chapter III

Search equipment and login- --

Chapter IV

Video attribute settings and

PTZ(Pan/Tilt/Zoom) control operations - -Chapter V

System Settings options - --

Chapter VI

Alarm settings - --

Chapter VII

Control pannel- --

Chapter VIII

Logout –Chapter IX

How to Access IP camera via
WAN(Wide Area Network)

Chapter I Product Introduction-Thank you to use wired/wireless IP Camera solution. IPCAM is
a electronic equipment which is able to transmit dynamic video
stream to all over the world through the network. The user
can always monitor the place he wants from anywhere, as long
as he is able to connect to Internet.
IPcanmera works based on the TCP/IP standard. A WEB server
is integrated inside which can support Internet Explorer. And
this feature can help you to accomplish online management and
maintenance on your device simply, such as remote
configuration, remote start-up and firmware upgrade.
You can use the IPCAM monitoring homes, offices, factories,
stores, nurseries and etc, simply, conveniently andreal-time.
1.1 Hardware/Software requirements:
To use the computer-camera through networks, the minimum
hardware requirements of your computer should be met,
Pentium III CPU or better, 1GHz or higher frequency;
At least 256M memory;
windows xp, windows 7, 2000 or above operation system
Internet explorer version 6.0 or above, IE 8.0 is strongly
recommended.
1.2 Product features:
Simpleinstallation: It is very simple to install IP
cameras. If you choose wired networking solution, you only
need to prepare power and networks connection. If you want
to use WIFI wireless connection, only power is a must.
Scope of applications: Apply to homes, offices,
enterprises, supermarkets, schools and other public places.
Supporting multiple protocols: Embedded operation system
supports theTCP / IP, SMTP (simple mail protocol), HTTP, UPNP,
etc.
Simple configuration: Standard Web browser GUI can help
users to control and manage the IP cameras through LAN or
Internet.
Video Watching and Video Record: Provide concise GUI for

user to watch real-time video stream from anywhere networking
connection is avalible. And the video segments can be recorded
on your computer.
AlarmMonitoring: Through external alarm device, the alarm
information can be sent to your e-box or your mobile phone.
Especially, user can activate motion detection function to
detect any movement in the selected area. If any illegal
invation happnes, alarm will be reaised. Simultaneously, the
captured images will be sent to email address specified by
user.
Support dynamic DNS: Support DynamicDNS. Users can access
his/her IP cameras easily through DDNS despite that the camera
IP changes frequently.
Simple User Authority Management: Setting USER and PASSWORD
of the system can help user to protect privacy effectively,
meanwhile, users can be authorized with different permission
levels to operate the IP camera.
1.3 Packing list:
●IP Camera
●WIFI Antenna(only supply for wirelesscamera)
●CDROM(include user guide,control, search equipment)
●Power adapter
●bracket

1.4 Interfaces

Audio：Used to connect headphones, monitor the user's voice
ANT: used to connect the antenna

I/O Alarm：1 and 2 are used to connecte alarm input, closing
trigger alarm.3 and 4 are used to connecte the external alarm
equipment ,and both of them are long open-type switch.when
there is anexternal alarm,3 or 4 would be closed and will
open the external equipment.
DC5V：Used to connect the power adapter.
RESET BUTTON：In the bottom of the camera.If user forget
the password,just press this botton for more than 5
seconds,then user can restore to factory settings.

Adjust camera lens:Gently rotate the lens until the image is
clear .

Chapter II installation
2.1 Hardware...