Niff

Administrator’s Guide to the DS2 Docking Station™
Hardware • Software • Installation • Operation • Troubleshooting

Part Number: Release Date: Version No.:

17112798 November 11, 2008 4.0

DS2 Docking Station

All rights reserved. This information or any part thereof may not, without the written consent of Industrial Scientific Corporation, be copied, reprinted or reproduced in anymaterial form including but not limited to photocopying, transcribing, transmitting or storing it in any medium or translating it into any language, in any form or by any means, be it digitally, electronic, mechanical, xerographic, optical, magnetic or otherwise. The information contained in this document is proprietary and confidential and all copyright, trade marks, trade names, patents and otherintellectual property rights in the documentation are the exclusive property of Industrial Scientific Corporation unless otherwise specified. The information (including but not limited to data, drawings, specification, documentation, software listings, source or object code) shall not at any time be disclosed directly or indirectly to any third party without prior written consent. The informationcontained herein is believed to be accurate and reliable. Industrial Scientific Corporation accepts no responsibility for its use by any means or in any way whatsoever Industrial Scientific Corporation shall not be liable for any expenses, costs by damage that may result from the use of the information contained within this document. The information contained herein is subject to change withoutnotice.

DS2 Docking Station™ is a trademark of Industrial Scientific Corporation. iNet Instrument Network™ is a trademark of Industrial Scientific Corporation. All other trademarks and registered trademarks are the property of their respective owners. Industrial Scientific Corporation 1001 Oakdale Road Oakdale, PA 15071-1500 USA Phone: 412-788-4353 Toll Free: 1-800-DETECTS (338-3287) Fax:412-788-8353 Service: 1-888-788-4353 Web: www.indsci.com

Although every effort is made to ensure accuracy, the specifications of this product and the content herein are subject to change without notice. © 2007 Industrial Scientific. All rights reserved.

ii

INDUSTRIAL SCIENTIFIC

Version 3.1 (P/N: 17112798)

DS2 Docking Station

Warnings and Cautionary Statements
WARNING: Failure to performcertain procedures or note certain conditions may impair the performance of this product. For maximum safety and optimal performance, please read and follow the procedures and conditions listed below. • • Use of this product in areas where it may be subject to large amounts of electromagnetic interference may affect the reliable operation of this device and should be avoided. Sources of largeamounts of interference could be and are not limited to: o Operation near high radio frequency fields (near 2-way radio transmission antennas where the RF fields may greatly exceed 10 V/M, etc.). o AC Power Mains that may have excessive power surges / spikes / transients (from large AC motors operating heavy loads which may induce voltage sags and, etc.). NOTE: This product has been tested to, andpasses all EMC requirements to EN 61326:1998 Electrical Equipment for Measurement, Control and Laboratory Use for Type 2 (Industrial) Apparatus, as well as FCC Part 15, Class A emissions levels when installed to the requirements outlined within this manual. Mandatory compliance to these standards help to ensure controlled, reliable operation of this device when exposed to typical levels ofelectromagnetic interference as well as ensuring that this device is not source of emissions that might interfere with other equipment installed nearby.

NOTE: Per 30 CFR 75.320(b), the DS2 Docking Station tests for oxygen deficiency of MSHA approved oxygen detectors compatible with the DS2 Docking Station that can detect 19.5 percent oxygen with an accuracy of ±0.5 percent.

NOTE: The DS2 has an...