Nordberg Lt200Hp
Páginas: 50 (12484 palabras)
Publicado: 13 de diciembre de 2012
SECTION
0
This Instruction Manual is valid for diesel engine driven Nordberg LT200HP primary crushing unit
manufactured by Metso Minerals. Nordberg LT200HP is a portable impact crusher unit, which is intended to
be used in recycling crushing applications in crushing plants.
Due to the continuous development of the product, the manufacturer reserves the right to makechanges to
the manual without prior notice.
This is the first edition of the Instruction Manual, published in June 2004 in Tampere, Finland.
Metso Minerals (Tampere) Oy
P.O. Box 306
FIN-33101 Tampere
Finland
Tel. +358 (0)20 484 142
Fax +358 (0)20 484 143
06/04
0-77-EN
NORDBERG LT200HP INSTRUCTION MANUAL 0-1
SECTION 0 - NORDBERG LT200HP
This Page Left Intentionally Blank.0-2
NORDBERG LT200HP INSTRUCTION MANUAL
0-77-EN
06/04
MAIN COMPONENTS
SECTION
3
3.1 MAIN ASSEMBLY
4
3
1
5
6
2
Callout
1
2
3
4
Description
Diesel engine
Tracks
Crusher
Lifting conveyor
Callout
Description
5
Main conveyor
6
Lubrication unit
Figure 3.1 Main assembly
06/04
3-80-EN
NORDBERG LT200HP INSTRUCTION MANUAL 3-1SECTION 3 - MAIN COMPONENTS
3.2 DIESEL ENGINE
Nordberg LT200HP crushing unit has a Caterpillar
C-12 diesel engine. The engine runs hydraulic
pumps.
3.3 TRACKS
The Nordberg LT200HP crushing unit moves on a
set of tracks. The tracks ensure a safe and speedy
operation of the machine even in rough terrain.
3.4 CRUSHER
The Nordberg HP200 cone crusher is the heart of
the Nordberg LT200HPunit. The materials fed into
the crusher are crushed into smaller pieces by the
machine.
3.5 LIFTING CONVEYOR
The feeder ensures an even and uninterrupted flow
of materials into the crusher. Lifting conveyor is
equipped with metal detector.
3.6 MAIN CONVEYOR
The main conveyor transfers the crushed material
from the crusher to the stock pile or onwards for
further processing. Freedistance to ground 2800
mm (110”).
3.7 OPTIONAL EQUIPMENT
3.7.1 Hydraulic Output
The hydraulic output can be set on, off or “on with
the process”. The selection is done by the process
option selection page.
Refer to the IC500/600 Instruction Manual for
further information on hydraulic output.
3.7.2 Intermediate Cable For Secondary
Unit
The unit can be equipped with a socket assembly byallowing intelligent controls between primary and /
or secondary unit.
3-2
NORDBERG LT200HP INSTRUCTION MANUAL
3-80-EN
06/04
SECTION 3 - MAIN COMPONENTS
3.8 ENGINE MODULE
Callout
Description
1
Crusher circuit filter
2
Hydraulic pressure filter
3
Oil filter
Callout
4
Oil fill port
5
Dipstick
6
Charger
Description
Figure 3.2 Engine module
06/043-80-EN
NORDBERG LT200HP INSTRUCTION MANUAL 3-3
SECTION 3 - MAIN COMPONENTS
3.9 HYDRAULIC TANK
Callout
1
2
Description
Hydraulic return filter
Breather
Callout
Description
3
Hydraulic oil sight glass
Figure 3.3 Hydraulic tank
3-4
NORDBERG LT200HP INSTRUCTION MANUAL
3-80-EN
06/04
CONTROL PANELS
SECTION
4
4.1 OPERATING PANEL SWITCHES & BUTTONS ANDCONTROL LEVERS
Callout
1
2
3
4
5
Description
Emergency stop
Lubrication unit
Radio control key
Water pump
Display
Callout
6
7
8
9
10
Description
Process ON
Key switch
Signal horn
Process OFF
Work light
Figure 4.1 Operating panel
06/04
4-73-EN
NORDBERG LT200HP INSTRUCTION MANUAL 4-1
SECTION 4 - CONTROL PANELS
4.2 DRIVE CONTROL BOX
4
1
2
3Callout
Description
1
Track, left-hand
2
Track, right-hand
Callout
Description
3
RPM of diesel engine
4
Emergency stop
Figure 4.2 Drive control device
4-2
NORDBERG LT200HP INSTRUCTION MANUAL
4-73-EN
06/04
SECTION 4 - CONTROL PANELS
4.3 REMOTE CONTROL
1
2
3
4
5
Callout
Description
1
Emergency stop
2
Feed stop
3
Feed start
Callout...
Leer documento completo
Regístrate para leer el documento completo.