Normas

Surface Surface and Dermal and Dermal Sampling Sampling

JAI Guest Editors: JAI Guest Editors: Michael Brisson Michael Brisson Kevin Ashley Kevin Ashley

Journal of ASTM International Selected Technical Papers STP1533
Surface and Dermal Sampling

JAI Guest Editors: Michael Brisson Kevin Ashley

ASTM International 100 Barr Harbor Drive PO Box C700 West Conshohocken, PA 19428-2959Printed in the U.S.A.

ASTM Stock #: STP1533

Library of Congress Cataloging-in-Publication Data ISBN: 978-0-8031-7519-8 Copyright © 2011 ASTM INTERNATIONAL, West Conshohocken, PA. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of thepublisher. Journal of ASTM International (JAI) Scope The JAI is a multi-disciplinary forum to serve the international scientific and engineering community through the timely publication of the results of original research and critical review articles in the physical and life sciences and engineering technologies. These peer-reviewed papers cover diverse topics relevant to the science and research thatestablish the foundation for standards development within ASTM International. Photocopy Rights Authorization to photocopy items for internal, personal, or educational classroom use, or the internal, personal, or educational classroom use of specific clients, is granted by ASTM International provided that the appropriate fee is paid to ASTM International, 100 Barr Harbor Drive, P.O. Box C700, WestConshohocken, PA 19428-2959, Tel: 610-832-9634; online: http://www.astm.org/copyright. The Society is not responsible, as a body, for the statements and opinions expressed in this publication. ASTM International does not endorse any products represented in this publication. Peer Review Policy Each paper published in this volume was evaluated by two peer reviewers and at least one editor. The authorsaddressed all of the reviewers’ comments to the satisfaction of both the technical editor(s) and the ASTM International Committee on Publications. The quality of the papers in this publication reflects not only the obvious efforts of the authors and the technical editor(s), but also the work of the peer reviewers. In keeping with long-standing publication practices, ASTM International maintainsthe anonymity of the peer reviewers. The ASTM International Committee on Publications acknowledges with appreciation their dedication and contribution of time and effort on behalf of ASTM International. Citation of Papers When citing papers from this publication, the appropriate citation includes the paper authors, “paper title”, J. ASTM Intl., volume and number, Paper doi, ASTM International,West Conshohocken, PA, Paper, year listed in the footnote of the paper. A citation is provided as a footnote on page one of each paper. Printed in Baltimore, MD November, 2011

Foreword
THIS COMPILATION OF THE JOURNAL OF ASTM INTERNATIONAL (JAI), STP1533, on Surface and Dermal Sampling contains only the papers published in JAI that were presented at a symposium in San Antonio, TX, on 14-15October 2010 and sponsored by ASTM Committee D22 on Air Quality and subcommittee D22.04 on Workplace Air Quality. The Symposium Chairs and JAI Guest Editors are Michael Brisson, Savannah River Nuclear Solutions LLC, Aiken, SC and Kevin Ashley, Centers for Disease Control/National Institute for Occupational Safety and Health (NIOSH), Cincinnati, OH.

Contents
Overview Acknowledgments........................................................... ....................................................
Standardization Issues

vii x

Review of Standards for Surface and Dermal Sampling K. Ashley, M. J. Brisson, and K. T. White

...................................

3

Derivation of Health-Based Screening Levels for Evaluating Indoor Surface Contamination G. Murnyak and H.-Y. Chang...