Ovejas De Corral

Housings Designs for Sheep and Goats
Harold Patterson & Gerald Proverbs

Suitable housing is essential if sheep and goats are to be safe from theft andattack from dogs. Housing is frequently restricted by limited funds. Therefore it must be low-cost and flexible in design. Both wind and rain have a chilling effecton sheep and goats and a combination of the two can result in extremely unfavourable conditions. The models in this factsheet are so designed that they can beeasily modified by the farmer or extension officer to better meet farmers' existing economic and environmental conditions. LOCATION The pen should be located on awell-drained site. Shed roofs should be sloped to the rear to prevent rainwater from draining into the exercise yard. The front of the building should open awayfrom the prevailing winds. VENTILATION Sheep/Goat housing should be well ventilated. A good ventilation system allows a supply of draft-free fresh air.

ROOFRoof construction can be gabled or flat, a flat roof is less costly and easier to build. BACK AND SIDE WALLS These walls should be five blocks high with chickenwire or welded wire from there to the roof. FLOOR The floor maybe solid floors of compacted earth, gravel or concrete. Regardless of the material or constructionfloors must be dry. Compacted or gravel floors are cheaper and suitable, however, the floor level must be above the outside grade and well-drained. Concretefloors are more expensive and are easier to clean than earth or gravel. The concrete should be laid to provide a 1% slope to drains to ensure a dry floor.